Basket

Products in your basket: 0

Amount: €0.00

To view products belonging to this category, click on the link here.

ELECTRONIC GAS LEAK DETECTOR for Gas Leak Detection without contamination

Gas leaks can cause detector noise and baseline instability, shorten column life and waste expensive carrier gas.

Liquid leak detectors, although inexpensive, can contaminate your system.

Electronic leak detectors are an easy way to quickly identify leaks in your system.Check your valves, fittings, and traps for leaks after routine maintenance and after thermal cycling as these can loosen some types of fittings.


Dedicated leak Detector

PG3388A
Handheld Electronic Gas Leak Detector

Provides both audible and visual alerts

  • Fast! One second to Helium in air.

  • Rechargeable NiMH Battery.

  • 5 hour battery life.

  • Lightweight: Less than 11 ounces - only 310 grams.

  • Uses a thermistor actuated thermal conductivity cell to detect leaks of gases with a thermal conductivity lower than 48 x 10-6 cal/cm/sec, (at 0.1 atm.) OR higher than 68 x 10-6 cal/cm/sec, (at 0.1 atm.). Commonly used gases in these ranges include: Hydrogen, Helium, Neon, Xenon, Methane, Argon, Carbon Dioxide, Propane and Krypton.

  • Minimum detection limit of 0.01mL/minute.

  • RoHS (Reduction of Hazardous Substances) Compliant.

Additional Information

  • Not usable with corrosive or combustible gases.

  • Unit Size: 2.56 in x 1.46 in x 5.63 in (65 x 37 x 143 mm).

  • Probe length: 5.28 in (134 mm).

PG3388 Accessories / Spare Parts