+353 (0)1 4523432
- Chromatography
- Environmental
- Aquaculture
- BOD Respirometry
- Buoys and Platforms
- Carbon COD-TOC-DOC-SAC-BOD
- Conductivity
- Dissolved Oxygen
- E-coli Online Monitoring
- Electrode Care and Maintenance
- Ionselective
- Multi-Parameter
- Nutrient Monitoring
- ORP-Redox
- pH
- Photometry
- Sample Analysis
- BOD
- COD
- Accessories for determining the COD
- behr COD Heating Blocks
- behrotest ® HTI 1 manual titration station
- COD cooling trough
- COD magnetic stirrer
- COD magnetic stirrer
- COD measuring station MD 200
- COD metering funnel
- COD Reagent
- COD sample digestion units PA-CSB
- COD Standard
- COD workstations, PB-CSB/M
- COD-Standard Cuvette Test, 16 mm
- HCl-absorber
- Thermoreactor CR 2200 / CR 3200 / CR 4200
- Thermoreactor RD 125
- Thermostat LT200
- TRS 300 programmable temperature and time control unit
- Workstations for SMA ARB and ARM
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Special Distillation
- Turbidity
- Sample Preparation
- Sondes
- Trace Analysis
- Turbidity Measurement
- UV Transmittance Monitors
- Water Flow Sensor
- Water Purification
- Water Samplers
- Laboratory
- Life Science
- promotions
- Ultra Violet Sanitisation
COD measuring station MD 200
According to ISO 15705. This measuring station from Lovibond® allows the accurate, rapid, and economical determination of meaningful waste water COD levels (Chemical Oxygen Demand). Easy operation, even by unskilled operators. Comprises of COD photometer, 25 tube tests covering lower measuring ranges, a reactor block for sample digestion and a tube stand. Waterproof acc. to IP 68, 1 hour at 0.1 meter.
Scope of supply: Instrument in carrying case, 4 batteries (AA), adapter for round vials diam. 16 mm, 2 sets of tube tests 0-150 mg/l and 0-1500 mg/l, thermoreactor RD 125, tube stand, 2 syringes, instruction manual.
| Specifications: Range: | 0 to 15.000 mg/L |
| Measurement cycle: | approx. 3 seconds (method dependent) |
| Display: | LCD readout |
| Optics: | High-quality Interference Filters |
| Power: | 4 batteries (AA) capacity approx. 53 hours or 15000 tests (continuous operation with backlit switched off) |
| Overall W x D x H: | 190 x 110 x 55mm |
| Storage: | 16 data sets |
| Interface: | internal interface for test data transfer |