+353 (0)1 4523432
- Chromatography
- Environmental
- Aquaculture
- BOD Respirometry
- Buoys and Platforms
- Carbon COD-TOC-DOC-SAC-BOD
- Conductivity
- Dissolved Oxygen
- E-coli Online Monitoring
- Electrode Care and Maintenance
- Ionselective
- Multi-Parameter
- Nutrient Monitoring
- ORP-Redox
- pH
- Photometry
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Special Distillation
- Turbidity
- Accessories for turbidity meter AL250T-IR / AL450T-IR
- Calibration Kit for Turbidimeter Eutech™ TN-100
- Coagulant injector for flocculation testers FJT-200D-6
- Flocculation tester AL30 / AL40 / AL50, bench top
- Flocculation testers
- Imhoff Sedimentation cones, borosilicate glass 3.3
- Imhoff Sedimentation Cones, SAN
- Imhoff sedimentation vessels, Nalgene®, PC
- Laboratory turbidimeter TB 300 IR
- Rack for Imhoff sedimentation vessels, Nalgene®, acrylic
- Secchi Disk
- Secondary turbidity standards Gelex
- Sedimentation cone, plastic, SAN
- Sedimentation cones acc. to Imhoff, borosilicate glass 3.3
- Sedimentation cones, accessory holder
- Sedimentation cones, accessory holders
- Sedimentation cones, accessory holders
- Sedimentation cones, accessory stand
- Sedimentation cones, borosilicate glass 3.3
- Sedimentation unit set, Nalgene®, PC
- Stand for Imhoff Sedimentation cones, PP
- Stands for Imhoff cones, PMMA
- Turbidity meter Eutech™ TN-100
- Turbidity meter TB 211 IR
- Turbidity meter Turb® 355
- Turbidity meter Turb® 750 IR
- Turbidity meter Turb® 750 T
- Turbidity meters Turb® 430
- Turbidity sensor VisoTurb® 900-P for Meters MultiLine® IDS
- Turbidity Standards
- Turbidity Standards Formazine
- Turbidity Standards StablCal® Formazine
- Viewdepth disk
- Sample Preparation
- Sondes
- Trace Analysis
- Turbidity Measurement
- UV Transmittance Monitors
- Water Flow Sensor
- Water Purification
- Water Samplers
- Laboratory
- Life Science
- promotions
- Ultra Violet Sanitisation
Laboratory turbidimeter TB 300 IR
Turbidity is measured according to ISO 7027 by nephelometric means (90° scattered light). The infra-red light-source permits measurement of coloured and colour-free samples. The automatic measurement range detection facility (Autorange) enables direct turbidity measurement from 0.01 to 1100 NTU.
- Automatic overall range adjustment with standard set T-Cal
- High accuracy
- Suitable for laboratory and mobile use
- Memory storage of up to 1000 data-sets
- Real-time clock
- Waterproof sample chamber and housing
Scope of supply: Turbidimeter TB 300 IR in carrying case, 1 set of turbidity standards T-Cal, 7 rechargeble batteries (AA), 1 lithium battery, main charger 100-240V, PC connection cable, 4 vials (diam. 24 mm) with lids, instruction manual
| Specifications | |
| Light source: | IR-LED (860nm) |
| Keypad: | acid and solvent resistant, membrane switch keypad |
| Auto - Off: | automatic switch off approx. 20 min after last key press |
| Display: | Graphic-display |
| Update: | Software update via internet |
| Memory: | 1000 data sets with date, time and registration no. |
| Measuring range: | 0.01 to 1100NTU (Auto range) |
| Resolution: | 0.01NTU (0.01 to 9.99NTU) 0.1NTU (10 to 99.9NTU) 1NTU (100 to 1000NTU) |
| Accuracy: | ± 2% of measured value or 0.01 (0 to 500NTU)/± 5% of measured value (500 to 1100NTU) |
| Ambient conditions: | 0 to 40°C at 30 to 90% R.H. (non condensing) |
| Interface: | RS232 |
| Power supply: | 7 NiMH rechargeable batteries (AA/Mignon), wall plug mains adapter and Lithium battery for data storage and real time clock |