+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Accessories for Heratherm Microbiological Incubators
- Accessories for Incubator Lovibond® DI 10
- Drip pan for incubator INC 125 F digital and incubator shaker INC 125 FS digital
- Heratherm Advanced Protocol Security Incubators
- Heratherm General Protocol Microbiological Incubators
- Hybridisation bottles
- Incubator
- Incubator BF Classic.Line
- Incubator INC 125 F digital
- Incubator INC-200, analogue
- Incubator INC-200D, digital
- Incubator Lovibond® DI 10
- Incubator, mechanical control, B 28 series
- Incubator, Stainless steel
- Incubators BF Avantgarde.Line
- Incubators IF
- Incubators IFplus
- Incubators IN and IF
- Incubators INplus and IFplus
- Microbiological incubators Heratherm™ Advanced Protocol Security, floor-standing models with powder-coated exterior housing
- Microbiological incubators Heratherm™ Advanced Protocol Security, floor-standing models with stainless steel exterior housing
- Microbiological incubators Heratherm™ Advanced Protocol Security, tabletop models with powder-coated exterior housing
- Microbiological incubators Heratherm™ Advanced Protocol, with powder-coated exterior housing
- Microbiological incubators Heratherm™ Advanced Protocol, with stainless steel exterior housing
- Microplate incubator, SI19
- Mini Incubator
- Mini Incubator, with shelf
- Mini-Incubator CULTURA® M including Multirack
- Mini-Incubator CULTURA® M, with Multirack
- Mini-Incubator CULTURA® M, with shelf
- Mini-Incubator Heratherm™ Compact IMC 18, with darkened windscreen
- Multirack for Mini-Incubator CULTURA® M, ABS
- Replacement door for Mini-Incubator LLG-uniINCU 20
- Special equipment for Universal ovens and Incubators
- Thermo Scientific™ Heratherm™ Compact Incubator
- Total visibility incubators, SI60 series, accessories
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Incubators INplus and IFplus
The incubators with the unique ControlCOCKPIT for a quick and intuitive operation.
For the gentle heating of organic chamber loads. The heating and control system are especially optimised for low temperatures of up to +80°C.
Standard equipment :
- PID microprocessor control with integrated auto-diagnostic system
- Interior made of stainless steel, material 1.4301 (ASTM 304) with all-round deep-drawn ribs to integrate the large-area heating with ceramic-metal sheath, very stable and easy to clean
- Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel (sizes 450 and 750 mounted on lockable castors)
- High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standards
- Internal data logger with a storage capacity of at least 10 years
- German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
- Digital backwards counter with target time setting adjustable between 1 minute and 99 days
- The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.
- Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT
Type designation: plus = Models with TwinDISPLAY TwinDISPLAY: ControlCOCKPIT with two TFT colour displays
- Available parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), fan speed, exhaust air flap position, programme time, time zones, summertime/wintertime
- Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error
- AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
- HeatBALANCE function for application specific adjustment of heat output distribution (balance) between the upper and lower heating groups in an adjustment range between -50 % and +50 % (not valid for model size 30)
- ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
- Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
- Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
- Multiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.1 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm
Incubators INplus and IFplus
PART NO.4AJ-9537975
73130||18593||75798||75716||75521||75477||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73295||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
IN450plus||449||+5||80||RT+5 ... 80 °C|| ||Yes||8||Stainless steel|| ||1224||784||1247||1,224 x 784 x 1247 mm||1040||600||720||1,040 x 600 x 720 mm||161.0||1800||EU||Mains connection||230 V, 50/60 Hz|| || ||1
Memmert
IN450PLUS
Incubators with natural convection
Ovens incubating
0
5
6
1
Out of Stock
PART NO.4AJ-9537974
73130||18593||75798||75716||75521||75477||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73295||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
IN260plus||256||+5||80||RT+5 ... 80 °C|| ||Yes||9||Stainless steel|| ||824||684||1183||824 x 684 x 1183 mm||640||500||800||640 x 500 x 800 mm||110.0||1700||EU||Mains connection||230 V, 50/60 Hz|| || ||1
Memmert
IN260PLUS
Incubators with natural convection
Ovens incubating
0
11
5
1
Out of Stock
PART NO.4AJ-9537973
73130||18593||75798||75716||75521||75477||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73295||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
IN160plus||161||+5||80||RT+5 ... 80 °C|| ||Yes||8||Stainless steel|| ||745||584||1104||745 x 584 x 1104 mm||560||400||720||560 x 400 x 720 mm||96.0||1600||EU||Mains connection||230 V, 50/60 Hz|| || ||1
Memmert
IN160PLUS
Incubators with natural convection
Ovens incubating
0
5
4
1
Out of Stock
PART NO.4AJ-9537972
73130||18593||75798||75716||75521||75477||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73295||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
IN110plus||108||+5||80||RT+5 ... 80 °C|| ||Yes||5||Stainless steel|| ||745||584||864||745 x 584 x 864 mm||560||400||480||560 x 400 x 480 mm||76.0||1400||EU||Mains connection||230 V, 50/60 Hz|| || ||1
Memmert
IN110PLUS
Incubators with natural convection
Ovens incubating
0
7
3
1
Out of Stock
PART NO.4AJ-9537971
73130||18593||75798||75716||75521||75477||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73295||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
IN75plus||74||+5||80||RT+5 ... 80 °C|| ||Yes||6||Stainless steel|| ||585||514||944||585 x 514 x 944 mm||400||330||560||400 x 330 x 560 mm||66.0||1250||EU||Mains connection||230 V, 50/60 Hz|| || ||1
Memmert
IN75PLUS
Incubators with natural convection
Ovens incubating
0
5
2
1
Out of Stock
PART NO.4AJ-9537970
73130||18593||75798||75716||75521||75477||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73295||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
IN55plus||53||+5||80||RT+5 ... 80 °C|| ||Yes||4||Stainless steel|| ||585||514||784||585 x 514 x 784 mm||400||330||400||400 x 330 x 400 mm||57.0||1000||EU||Mains connection||230 V, 50/60 Hz|| || ||1
Memmert
IN55PLUS
Incubators with natural convection
Ovens incubating
0
0
1
1
Out of Stock
PART NO.4AJ-9537969
73130||18593||75798||75716||75521||75477||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73295||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
IN30plus||32||+5||80||RT+5 ... 80 °C|| ||Yes||3||Stainless steel|| ||585||434||704||585 x 434 x 704 mm||400||250||320||400 x 250 x 320 mm||48.0||1600||EU||Mains connection||230 V, 50/60 Hz|| || ||1
Memmert
IN30PLUS
Incubators with natural convection
Ovens incubating
0
9
0
1
Out of Stock
PART NO.4AJ-9537976
73130||18593||75798||75716||75521||75477||74423||74415||75501||74437||75791||75780||75700||75444||75681||75669||75770||75463||73569||73295||18919||18875||73812||73810||76298||73401
Type||Nominal capacity l||Min. temperature °C||Max. temperature °C||Temperature||Temp. Stability||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. depth mm||Ext. height mm||External dimensions (WxDxH)||Int. width mm||Depth int. mm||Height int. mm||Internal dimensions (WxDxH)||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
IN750plus||749||+5||80||RT+5 ... 80 °C|| ||Yes||14||Stainless steel|| ||1224||784||1720||1,224 x 784 x 1720 mm||1040||600||1200||1,040 x 600 x 1200 mm||217.0||2000||EU||Mains connection||230 V, 50/60 Hz|| || ||1
Memmert
IN750PLUS
Incubators with natural convection
Ovens incubating
0
5
7
1
Out of Stock