Tested and approved to EN 143 / EN 14387 standards with CE mark. Plug-in filters are connected to the mask by a filter mount. The filter mount is fitted with standard thread connections to EN 148-1.
Particle filters consist of a light PE housing with a built-in glas fibre filter. Special folding provides a large filter surface area in a confined space.
A pre-filter collects aerosol mist and dust and prevents rapid accumulation of dirt particles in the main filter, thereby prolonging its lifespan. Easy to exchange by inserting into the outer chamber of the filter mount. Flame resistant.
Filter type A: | Vapours from organic compounds with boiling point >65°C |
Filter type B: | Inorganic gases and vapours e.g. chlorine |
Filter type E: | Sulphur dioxide, acidic gases |
Filter type K: | Ammonia |
Filter type P 1: | Low particle filtration capacity |
Filter type P 2: | Medium particle filtration capacity |
Filter type P 3: | High particle filtration capacity |
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks
Breath protection
Respiratory protection
Safety half-masks