+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Flame Photometer PFP7
- Industrial analysis
- Low temperature
- Incl. Na, K, Ca, Ba und Li filters
- Electronic flame failure detection
- Fine & coarse sensitivity controls
- Operates on propane, butane, natural gas or L.P.G. supplies
- 3 year warranty
Fitted with automatic flame failure detection for user safety, making it ideal for use in clinical, industrial and educational applications.
Supplied with: Fitted with electronic flame fail safe and supplied with Na, K, Li, Ba and Ca filters, connecting hoses and clips, compressor plug, drain trap, fuses and operating/service instructions
| Specifications | |
| Range FF-200D-I: Range FF-200D-R: Limits of detection Na/K: Li: Ca: Ba: | 0 ... 199.9 ppm 120 ... 160 ppm Na, 0 ... 10 ppm K < 0.2 ppm < 0.25 ppm < 15 ppm < 30 ppm |
| Reproducibility: | < 1 % (Coefficient of variation for 20 consecutive samples using 10 ppm Na set to a reading of 50) |
| Linearity: | < 2 % (when concentration of 3 ppm Na/K and 5 ppm Li are set to a reading of 100) |
| Specificity: | Interference from Na, K and Li equal in concentration to test element will be < 0.5 % |
| Recorder output: | Nominal 1.00 V for a reading of 100.0 |
| Air: | 6 l/min at 1 Kg/cm2 /14psi (oil and moisture free pressurised air) |
| Dimensions (W x D x H): Weight: | 420 x 360 x 300 mm 8 kg |
| Power supply: | 190 ... 250 V, 50/60 Hz |