Benchtop-Autoclaves HMT FA/-MA and -MB series

Innovative and versatile autoclave, which combines compact and elegant design with high performance, reliability and safety

• Auto dry function: To offer the good dry result
• Microprocessor control system: Fully automatic controls from adding water to sterilisation, to drying.
• Double water level check device: One for water tank, and one for chamber water level check
• Pressure door auto-lock device
• Door close indication: All functions stopped and the door light is on, if the door isn't closed completely.
• Cycle complete indication: Auto-check each working steps condition. The "COMPLETE" indicator will light up, after correct completion of the batch.
• Low water alarm and indication: If there isn't enough water, the "LOW-WATER" indicator will light up, and alarm you.
• Pre-heating program: Pre-heating by dry heater, which not only keeps the chamber temperature in balance, but also offers the perfect dry function.
• Chamber pressure with double protection: The chamber is protected by a pressure switch and steam pressure safety valve.
• Vacuum/Pressure release key: Pushing this key, will cut-off the power supply and exhaust the chamber pressure or release the chamber vacuum, at the same time.
• Safety functions such as door lock, over heat protection, water tank level sensor, chamber water level sensor are equipped as standard
• Power supply: 230V, 50/60Hz
• Inclusive bottom plate

• Installed 8 programs and special programs for Liquid sterilisation for your selection
• Sterilisation temperature: 105 to 135°C
• HMT 230 FA-R and HMT 260 FA-R are certified according to Medical Device Directive as N-class autoclaves

• Pre-vacuum function: Offer the excellent sterilisation result.
• Dry-vacuum function: To offer the perfect dry result.
• 24 Installed programs and special programs for Prion sterilisation, Liquid sterilisation, Bowie-Dick test, Pump test programs for your selection.
• Sterilisation temperature: 121 to 134°C
• HMT 230MA-R/HMT 260MA-R/HMT 300MA-R are certified according to Medical Device Directive as S-class autoclaves

• Pre-vacuum function: Offer the excellent sterilisation result.
• Dry-vacuum function: To offer the perfect dry result.
• 10 installed programs: 5 sterilisation programs, 1 customized program for your selection, 3 test programs, drying program
• Sterilisation temperature: 105 to 135°C
• HMT 260MB is certified according to Medical Device Directive as B-class autoclaves