+353 (0)1 4523432
- Chromatography
- Chemical Standards
- Chromatography Paper
- Column Chromatography Media
- Deuterium and Tungsten Lamps
- Flowmeters
- Gas Generators
- Gas Management Supplies
- GC Capillary Columns
- GC Consumables
- GC Reagent
- GC Supplies
- Glass Column
- HPLC Accessories
- HPLC Columns
- ICP MS Supplies
- LC Supplies
- NMR/EPR
- Solvent Storage and Handling
- Accessories for Bottle attachments
- Accessories for HPLC reservoir bottles DURAN®, borosilicate 3.3 glass, with conical base
- Adapter for exhaust filter, PP
- Adapter for Safety Waste Caps V3.0, electrostatic conductive
- Adapters for capillary connections, PP
- Adapters for exhaust filter connection
- Adapters for exhaust filters
- Air valves for Eluent SafetyCaps
- Air valves Generation 2.0 for SafetyCaps
- Air valves, PP
- Air valves, PP, PFAS Analytic
- b.safe caps, B 83, PE
- b.safe Caps, GL 28, PPS
- b.safe Caps, GL 45, PPS, lateral connections
- b.safe Caps, GL 45, PPS, preparative
- b.safe Caps, GL 45, PPS, with stopcocks
- b.safe caps, GL45, PP/PPS, PFAS Analytic
- b.safe caps, GLS 80, PP
- b.safe Caps, GPI 38/400, PPS
- b.safe Caps, GPI 38/430, PPS
- b.safe Caps, S 40, PPS
- b.safe Caps, S 40, PPS, with stopcocks
- b.safe Caps, with ground joint, PTFE
- b.safe Waste Caps B 53, PE, with electronic fill level control
- b.safe Waste Caps B 53, PE, with filling funnel
- b.safe Waste Caps B 63, PE
- b.safe Waste Caps B 83, PE
- b.safe Waste Caps B 83, PE, with electronic fill level control
- b.safe Waste Caps GL45, PPS, with filling funnel
- b.safe Waste Caps S 51, PP, with electronic fill level control
- b.safe Waste Caps S 51, PP, with filling funnel
- b.safe Waste Caps S 55, PP, with electronic fill level control
- b.safe Waste Caps S 55, PP, with filling funnel
- b.safe Waste Caps S 60, PP, with electronic fill level control
- b.safe Waste Caps S 60, PP, with electronic fill level control and grounding connection
- b.safe Waste Caps S 60, PP, with filling funnel
- b.safe Waste Caps S 65, PE
- b.safe Waste Caps S 70/71, PP
- b.safe Waste Caps S 70/71, PP, with filling funnel
- b.safe Waste Caps S 90, PE, with electronic fill level control
- b.safe Waste Caps S 90, PP
- b.safe Waste Caps S 95, PE, with electronic fill level control
- b.safe Waste Caps, B 53, PE
- b.safe Waste Caps, PP, with electronic fill level control and filling funnel
- b.safe Waste Caps, S 40, PPS
- b.safe Waste Caps, S 50, PP
- b.safe Waste Caps, S 51, PP
- b.safe Waste Caps, S 55, PP
- b.safe Waste Caps, S 60, PP
- b.safe WasteCaps, GL 45, PPS
- b.safe-Caps Starter Boxes, GL 45, PPS
- b.safe-Caps, GL45, PPS
- Blind fittings, for Caps and Waste Caps
- Blind fittings, for Caps and Waste Caps, NS 29/32
- Blind fittings, PE, PFAS Analytic
- Blind plugs for Eluent SafetyCaps
- Blind plugs for Safety Waste Caps V3.0, Satellite
- Blind plugs for SafetyCaps / SafetyWasteCaps
- Bottle attachments, PFA/PP
- Capacitive leakage sensor, PTFE
- Capacitive rod sensor, PTFE
- Capillary connections, PTFE
- Capillary cutter
- Capillary PTFE
- Collectors for tube connector for SafetyWasteCaps
- Coupling pieces, PP
- Disc sensor set, signal lamp, empty state
- Disc sensor set, signal lamp, full state
- Disc sensor set, T5, empty state
- Distributor for capillaries, PTFE
- Distributor for capillaries, PTFE
- Eluent SafetyCap Starter Kits
- Eluent SafetyCaps
- Exhaust filter for barrels, PE
- Exhaust Filter, PP
- Exhaust filters for Waste SafetyCaps
- Exhaust filters V3.0
- Exhaust filters V3.0, with change label
- Fittings and Ferrules for capillary connector for SafetyCaps / SafetyWasteCaps
- Fittings for Eluent SafetyCaps / Waste SafetyCaps
- Fittings preparative, PTFE, for Caps
- Fittings, PE, PFAS Analytic
- Fittings, PFA, for Caps and Waste Caps
- Flanged tubing, PTFE, PA
- Flexible connecting system for DURAN® GL 45 flasks
- Funnels for Safety Waste Caps V3.0, HDPE
- Funnels for Safety Waste Caps V3.0, HDPE, electrostatic conductive
- Holders for capillaries and tubing, ABS
- Hose connectors for Waste Caps
- Hose connectors for Waste SafetyCaps
- HPLC bottle distributors
- HPLC bottles, DURAN® complete system 4-port screw cap
- HPLC reservoir bottles DURAN®, borosilicate 3.3 glass, with conical base
- HPLC Safety Set Generation 2.0
- HPLC starter kits Generation 2.0, GL 45
- HPLC Supply-Set II, type 4
- HPLC Waste disposal set 1, V2.0
- HPLC Waste disposal set 2, V2.0
- HPLC Waste disposal set 3, V2.0
- HPLC Waste disposal set 4, V2.0, S 60/61
- Inlet filter for solvents
- Installation wrench, POM, hexagonal
- Level controls, PTFE
- Level controls, PTFE, electrically conductive
- Locking nuts, PP, for thread adapters with ground joint
- Mounting key for fittings, POM
- Multiple bottle distributors GL 45, HDPE
- Multiple bottle distributors, HDPE
- Multiple bottle distributors, PP/PPS
- Multiport, PTFE
- Osmolality standards
- Power supply unit for electronic level control
- Quick couplings 2.0, for Safety Caps / Safety Waste Caps, PP
- Quick couplings, PP
- Replacement parts and accessories for HPLC bottle distributors
- Safety Caps, 38-430
- Safety Caps, B 53
- Safety Caps, B 83
- Safety Caps, GL 32
- Safety Caps, GL 38
- Safety Caps, GL/ S 40, with shut-off valve
- Safety Caps, GL/ S 40, with shut-off valve
- Safety caps, GL45, PPS/PP, PFAS Analytic
- Safety Caps, GLS 80
- Safety Caps, NS 29/32
- Safety Caps, V2.0, GL 28
- Safety Caps, V2.0, GL 45, 90° angled
- Safety Caps, V2.0, GL 45, preparative
- Safety Waste Cap, S 60/61, with level control, PTFE, electrostatic conductive
- Safety Waste Caps SymLine®, PTFE, electrostatic conductive
- Safety Waste Caps V2.0, GL 45
- Safety Waste Caps V2.0, GL/ S 40
- Safety Waste Caps V3.0
- Safety Waste Caps V3.0, electrostatic conductive
- Safety Waste Caps V3.0, with Quick-Lock Connector
- Safety Waste Caps, B 53
- Safety Waste Caps, B 63
- Safety Waste Caps, B 83
- Safety Waste Caps, GLS 80
- Safety Waste Caps, S 50
- Safety Waste Caps, S 51
- Safety Waste Caps, S 55
- Safety Waste Caps, S 55, with grounding connection
- Safety Waste Caps, S 60/61, with grounding connection
- Safety Waste Caps, S 65
- Safety Waste Caps, S 65, with grounding connection
- Safety Waste Caps, S 70/71
- Safety Waste Caps, S 70/71, with grounding connection
- Safety Waste Caps, S 90
- Safety Waste Caps, S 90, with grounding connection
- Safety Waste Caps, S 95
- Safety Waste Caps, with electronic level control
- Safety Waste Caps, with mechanical level control
- Safety Waste Collector, GL 45
- SafetyCaps Generation 2.0, GL 45
- SafetyCaps, V2.0, GL/S40, PPS
- SafetyWasteCaps SymLine®, HDPE
- SafetyWasteCaps with mechanical level control
- SafetyWasteCaps, V2.0, S 60/61, PPS
- Satellite for Safety Waste Caps V3.0
- Satellite for Safety Waste Caps V3.0, electrostatic conductive
- Septum adapters, PTFE
- Set for continuous level control
- Signal lamps for level control
- Signalbox T5
- Spiral tubing, PFA, for b.safe Caps and b.safe Waste Caps
- Suction filters, PE
- Suction filters, PFA
- Switchbox II
- Table distributor b.safe, PP, with magnet
- Table distributor b.safe, PP, with silicone-free adhesive pad
- Thread adapter for SafetyCaps / SafetyWasteCaps, female thread
- Thread adapter, G1/2" (m) on thread GL25 (m)
- Thread adapters for Eluent SafetyCaps / Waste SafetyCaps
- Thread adapters for SafetyCaps / SafetyWasteCaps, PTFE
- Thread adapters with ground joint for b.safe Caps and Waste Caps
- Thread adapters with ground joint for b.safe Caps and Waste Caps
- Thread adapters, type A, for Caps and Waste Caps
- Thread adapters, type B, for Caps and Waste Caps
- Thread adapters, type C, for Caps and Waste Caps
- Tube fittings for the tube connector SafetyWasteCaps
- Universal Waste Hub
- Universal Waste Hub, electrostatic conductive
- Universal Waste Hub, electrostatic conductive, with mechanical level control
- Waste SafetyCaps
- SPE
- Syringe Filter
- Syringes
- Thin Layer Chromatography
- Tubing
- UV Vis Supplies
- Vials
- Environmental
- Laboratory
- Life Science
- promotions
- Ultra Violet Sanitisation
Flexible connecting system for DURAN® GL 45 flasks
Materials used: PP and PTFE. Flexible modular system. Four different tube diameters (1.6mm; 3.0mm; 3.2mm and 6.0mm) can be connected. Sterile pressure equalisation is possible through use of a membrane filter. Unused ports can be provided with a blind cap.
Typical applications: safe transfer of liquid media within a closed and sterile system (evaporation is reduced).
Temperature resistant up to max. 140°C. For all solvents PP-resistant.
Flexible connecting system for DURAN® GL 45 flasks
PART NO.4AJ-7623018
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Screw cap GL 45, 3 port x GL 14|| || || || ||1
Duran
1129751
554-3001
HPLC bottles
44
4
1
2
Price: €32.73
In Stock
PART NO.4AJ-6230844
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Membrane filter for pressure equilisation, 0.2 µm|| || || || ||1
Duran
1129819
554-3011
HPLC bottles
0
3
12
2
Price: €7.98
Out of Stock
PART NO.4AJ-6230213
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Liner for GL 14 screw cap, 3.2 mm i.d. hole|| || || || ||1
Duran
1129817
554-3007
HPLC bottles
40
3
7
1
Price: €14.70
In Stock
PART NO.4AJ-6229495
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Liner for GL 14 screw cap, 3 mm i.d. hole|| || || || ||1
Duran
1129816
554-3006
HPLC bottles
14
3
6
1
Price: €14.70
In Stock
PART NO.4AJ-6229494
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Liner for GL 14 screw cap, 1.6 mm i.d. hole|| || || || ||1
Duran
1129815
554-3005
HPLC bottles
0
4
5
1
Price: €14.70
Out of Stock
PART NO.4AJ-6228023
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Pressure equalising set, for 2- and 3-Port screw cap, incl. 0.2 µm membrane filter, GL 14|| || || || ||1
Duran
1137799
554-3009
HPLC bottles
16
3
9
1
Price: €28.63
In Stock
PART NO.4AJ-6227782
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Liner for GL 14 screw cap, 6 mm i.d. hole|| || || || ||1
Duran
1129818
554-3008
HPLC bottles
38
6
8
1
Price: €14.70
In Stock
PART NO.4AJ-6227781
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Screw cap GL 14 for tubing connector|| || || || ||1
Duran
1129814
HPLC bottles
0
3
3
2
Price: €4.49
Out of Stock
PART NO.4AJ-6227780
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Scew cap GL 45, 2 ports x GL 14|| || || || ||1
Duran
1129750
554-3000
HPLC bottles
70
5
0
2
Price: €30.61
In Stock
PART NO.4AJ-6226915
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Pressure equalising set, 4-Port screw cap, incl. 0.2 µm membrane filter|| || || || ||1
Duran
1137801
554-3010
HPLC bottles
0
2
10
1
Price: €28.63
Out of Stock
PART NO.4AJ-6226329
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Spare set for HPLC screw cap|| || || || ||1
Duran
1129813
554-3003
HPLC bottles
0
5
11
1
Price: €27.02
Out of Stock
PART NO.4AJ-6226328
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Screw cap GL 45, 4 ports (4 x M8 screw caps, 12 x silicone seals)|| || || || ||1
Duran
1129812
554-3002
HPLC bottles
7
3
2
1
Price: €35.29
Low Stock
PART NO.4AJ-7623838
18730||73023||75422||73527||73334||73401
Description||For||Ext. Ø||Colour||Material||PK
Screw cap, PBT with PTFE coated seal, GL 14, red|| || || || ||1
Duran
1156292
SCOT1156292
HPLC bottles
0
3
4
2
Price: €2.57
Out of Stock