The first and only photometer using just one LED and one (JENCOLOR) sensor, simultaneously covering 400 wavelengths in one go. The JENCOLOR sensor allows self-calibration of the unit in seconds.
More than 100 test methods are available to be individually selected when device is purchased. User can choose to either use tablet, liquid or powder reagents. Users can create and export test reports per "account" via software and/or App, where it also can store individual water treatment chemicals to create dosage recommendations. Using the PrimeLab adapter for Turbidity (NTU), PTSA and Fluorescein, even those parameters can be tested by the PrimeLab whereas user normally needs to purchase a second device. View a full range of available test information can be found at www.primelab.org.
PrimeLab 1.0 Multitest Photometer BASIC-KIT 3-in-1 (Chlorine/pH/Chlorine dioxide):
ID11 - Chlorine (free/combined/total) usning DPD tablets
ID16 - Chlorine dioxide using DPD tablets
ID38 - pH using Phenol Red tablets
Reagent tablets to do 50 tests
More combinations of measurement methods on request.
PrimeLab 1.0 Multitest Photometer ALL-IN-KIT (all current and future parameters activated):
Contains the measurement methods of BASIC-SET and same content as basis (over 100 parameters). All available parameters are activated on the device and will be automatically added and activated while performing an update through PC-software or App.
Please order reagents separately.