For pure water and ultra pure water Type ASTM I + II.
OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. It provides both types from a single system. These also make it possible to connect the system directly to a drinking water tap. A touch on the flexible dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.
Applications:
OmniaTap 6 / 12: AAS, IC, ICP, buffers and media preparation
OmniaTap 6 UV / 12 UV: Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis
OmniaTap 6 UV/UF / 12 UV/UF: Life science and microbiology, cell culture media
Scope of supply: Instrument incl. filter cartridges and sterile filter capsule 0.2 µm
Specifications Type II | OmniaTap / OmniaTap UV / OmniaTap UV/UF |
Ultrapure water output: | 6 or 12 l/h |
Resistivity: | 15-10 MΩ-cm |
Conductivity: | 0.067-0.1 μS/cm |
Pure water tank pressurized outlet: | optional |
Type I | |
Dispensing performance: | up to 2 l/min |
Resistivity: | 18.2 MΩ-cm |
Conductivity: | 0.055 μS/cm |
Bacteria (with end filter): | < 0.1 CFU/ml |
Particles (with end filter): | < 1/ml |
Feed water requirements: | Drinking water according to DIN 2000 |
Dimensions (W x D x H): | 390 x 615 x 720 mm |
Weight: | 20 kg / 21 kg / 21 kg |
Power supply: | 90-240 V, 50/60 Hz |
Pure water systems
Water purification ultra-pure water systems
Pure water systems
Water purification ultra-pure water systems
Pure water systems
Water purification ultra-pure water systems
Pure water systems
Water purification ultra-pure water systems
Pure water systems
Water purification ultra-pure water systems
Pure water systems
Water purification ultra-pure water systems