+353 (0)1 4523432
- Chromatography
- Environmental
- Aquaculture
- BOD Respirometry
- Buoys and Platforms
- Carbon COD-TOC-DOC-SAC-BOD
- Conductivity
- Dissolved Oxygen
- E-coli Online Monitoring
- Electrode Care and Maintenance
- Ionselective
- Multi-Parameter
- Nutrient Monitoring
- ORP-Redox
- pH
- Photometry
- Sample Analysis
- Sample Preparation
- Air Sampling and Analysis
- Accessories for O2NE+ and Safe-Ox+ depletion Safety Monitors
- Accessories for portable gas detectors series 04
- Air Flow Tester
- Air sampler, Airport MD8 airborne bacteria sampler
- Air sampler, MD8 airscan airborne bacteria sampler, accessories
- Carbon Dioxide Safety Monitor AX60
- Dräger Aerotest Alpha
- Dräger Sampling Tubes
- Dräger Tubes®
- Dräger-Tubes®
- Dräger-Tubes®
- Gas analyzers MAT1100/MAT1200
- Gas analyzers MAT1400/MAT1500
- Gas pump Accuro
- Gas warining device X-am® 7000
- Oxygen Depletion Safety Monitor, O2Ne+™
- Oxygen Enrichment and Depletion Safety Monitor, Safe-Ox+™
- Pollution monitor 3500+
- Portable gas detectors series 04
- Sampling bags, FEP
- Sampling bags, PVDF
- Test gas in disposable bottles
- For Standing Analysis
- Air Sampling and Analysis
- Sondes
- Trace Analysis
- Turbidity Measurement
- UV Transmittance Monitors
- Water Flow Sensor
- Water Purification
- Water Samplers
- Laboratory
- Life Science
- promotions
- Ultra Violet Sanitisation
Oxygen Depletion Safety Monitor, O2Ne+™
The widespread use of N2, LN2, He or Ar in laboratories poses a potential asphyxiation hazard to personnel. If an inert gas leaks or builds up in a confined area it can deplete the O2 to dangerously low levels. The use of enriched O2in laboratories poses both a fire risk and hyperoxia risk to personnel if it were to leak or build up in a confined area.
The O2NE+ and Safe-Ox+ from Analox Sensor Tecnhology are an affordable, low maintenance, long life solution to assist in mitigating the risk of using these gases in your laboratory.
- Long life, low drift sensor lasts up to 7 years
- Minimum calibration check required - only every 12 months (user maintainable)
- Simple to read "OK", "Alarm" and "Fault" indication
- Easy installation and maintenance can be conducted by the user
- Additional (quick connect) alarm repeaters available if more than one entrance to the laboratory
- Assists in compliance with Exposure Limit regulations such as EH40
- Supplied with relays which can be used to trigger ventilation or building management systems etc
The O2NE+™ is a simple to use, wall mounted oxygen depletion monitor which has 2 audible/visual alarms which will trigger at 19.5% and 18% O2 which means that lab personnel can take evasive action in the event of a gas leak.
Delivery Includes: Main O2 sensor unit with relay on 2nd alarm (18%) and 1 alarm repeater to be placed at the entrance, with mains power supply
| Specifications: | |
| Range : | 0.1 to 25 % O2 |
| Sensor Accuracy : | +/- 0.75 % O2 (5.0 to 25.0 %) |
| Alarm intensity : | 85 dbA |
| Monitor display : | 4 digit LCD |
| Operating Temperature : | 0 to 40 °C |
| Monitor Dimensions : | 175 x 110 x 75 mm |
| Alarm Repeater Dimensions : | 72 x 170 x 45 mm |
| IP Rating : | IP65 (IP43 alarm repeater) |
PSCMSQuantityValidate - Sorry, an unexpected error has occurred