Your basket is empty

MAXX TP5 C - 24 x 1 L
Enlarge

MAXX TP5 C - 24 x 1 L

PART NO: M-2054024

The TP 5 Cis a portable sampler in plastic housing, complete with insulating box with active cooling, vacuum dosing system and plastic metering vessel 20 - 350 ml.


It is microprocessor controled, battery-operated (12V/10Ah) and includes 5m suction hose with screw connection and sinker weight. With 24-position motor-driven distributor system and24 x 1,0L PE bottles.


Main Features:



  • New, direct connection via USB of an external multiparameter portable meter pH/Cond/Temp (Option)

  • Clear operating structure and simple programming

  • LAN/WLAN/GPRS communication (Option)

  • Easy cleaning

  • Modern and ergonomic design

  • Transport trolley (Option)

  • Highly accurate sample volume

  • Minimal effort for calibration (Peristaltic pump)

  • Integrated pump replacement tube (Peristaltic pump)

  • Available with peristaltic pump and vacuum system

  • Long battery run-time thanks to "sleep mode"

  • 2nd dosing tube for changing the sample volume (Vacuum)


Type Portable sampler
Housing PE / PC (GF10)
Thermostatic control Insulated lower part (sample compartment) (insulation thickness 40mm)
Option: freezer packs (200x10x8mm)
Option: compressor cooling (12V/115V/230V)
Control Microprocessor control, Sleep-Mode (<5mA), power supply 8-16 V
foil keyboard (with keys 0-9, ESC, ENT, cursor), graphical display (128*64 Pixel), back lit
Data logger 3000 entries, non-volatile data memory;
storage of sampling and malfunction data like sample extractions, bottle changes,
messages, external signals.
optional with WEB-board 100MB
(2 Year ring memory-FIFO at 1 min interval)
Programming 12 freely programmable user programs, with function to link programs.
Program start options - IMMEDIATELY;
- DATE/TIME
- WEEKDAY/TIME;
- BY AN EXTERNAL SIGNAL
Program End/Stop options End of sampling program
- AFTER 1 RUN
- AFTER X RUNS
- CONTINUOUS OPERATION
- DATE/TIME
Pause mode Interruption of program run at any time
Overfilling protection Adjustable from 1–999 samples/bottles
Interval setting 1 min. to 99 h 59 min. in steps of 1 minute
Pulse setting 1 to 9999 pulses/sample
Manual sample extraction Possible at any time without interrupting the current program run
Program protection Up to 5 years after voltage loss
Interface Mini-USB, RS 232
optional: Ethernet RJ45, SDI-12
Communication (option)

LAN / WLAN / GPRS-UMTS optional:

1. Connection via USB and PC

  • maxxwareConnect® has to be installed on the PC
  • Connection to the sampler via USB/MiniUSB cable

  • Remote control of the sampler

  • Visualization of downloaded data

  • Download and saving of data as PDF, CSV or XLSX Format

  • Print-out of data directly as PDF Format

  • Backup of all preprogramed programs from the sampler

  • Setting and saving of programs in offline mode. Upload in online mode

  • Read out, changing, saving or upload of all sampler programs (1-12 )

  • Recovery of saved programs.
  • 2. LAN Modul RJ45 via TCP/IP and IE-Browser

  • ARM9-SoC

  • 32MB RAM

  • 100 MB Data Memory ((2 Year ring memory-FIFO at 1 min interval)

  • Linux OS

  • TCP/IP (RJ45)

  • Recording of all CPU Data (like data of sampling cycle, bottle report, error log, temperature etc.)

  • Visualization via Web interface

  • Data-export (PDF, CSV, XLS)

  • E-Mail error messaging
  • 3. LAN Modul RJ45 + GPRS/UMTS Router

  • ARM9-SoC

  • 32MB RAM

  • 100 MB Data Memory ((2 Year ring memory-FIFO at 1 min interval)

  • Linux OS

  • TCP/IP (RJ45)

  • Recording of all CPU Data (like data of sampling cycle, bottle report, error log, temperature etc.)

  • Visualization via Web interface

  • Data-export (PDF, CSV, XLS)

  • E-Mail error messaging

  • additionaly
    + Fully integrated Router (industrial standard)
    + UMTS / GPRS
    + SIM card holder
    + E-Mail error messaging
    + antenna

    Languages Multi-language, selectable
    Signal inputs
  • 2 x analogue: 0/4-20 mA
  • 8 x digital (flow, event, 1 inputs can be programmed freely)
    option: expandable with 4x digital, 3 inputs can be programmed freely, and 8x analogue 0- 20 mA or 0-10 V, Impulslength 60ms, switching level 7-24 V, max. working restistance 500 Ohm, max. length of signalcable 30 m
  • Signal outputs / status messages
  • 8 digital outputs,
    1x of them as collective malfunction message (Relay optional)
    option: expandable with 8 digital, 5 are freely programmable (in total 6 messages)
  • Sampling method - Vacuum system 20-350 ml
    - Vacuum VAR (variable) system 5-250 ml
    Option: peristaltic pump 10-10.000 ml (flow-proportional)
    Single sample volume accuracy Vacuum system: < 2,5 % or +/- 3 ml Peristaltic pump: +- 5 % or +/- 5 ml
    Suction height Max. 6,5 m (at 1013h Pa)
    optional 8,5 m or 15 m (Power Booster)
    Pumping speed >0,5 m/s at suction height up to 5 m (at 1013h Pa); pump capacity can be adjusted electronically
    Suction hose PVC, L=5 m, ID=10 mm max. hose length 30 m
    Sampling modes Time-related, flow-dependent, event- related and manual sample extraction. Option: flow-proportional (for Peristaltic Pump as standard)
    Bottle variants 1 x 10 L PE
    1 x 25 L PE
    2 x 13 L PE
    4 x 5 L PE
    16 x 1 L PE incl. freezer packs 24 x 1 L PE (standard version)
    Overall dimensions (Hxwxd)
    787 x 510 x 468 mm /Insulating box passive
    1028 x 550 x 468 mm / Insulating box active (with compressor cooling)
    Weight Approx. 25 kg 24x1 L - Isobox with passive cooling
    Approx. 40 kg 24x1L - Isobox with compressor cooling (device incl. battery,
    empty bottles but no suction hose)
    Power supply Sampler:
    12 V/ 10 Ah lead storage battery (maintenance-free, leak proof);
    115V or 230V operation by means of battery charger in buffer mode. Range 11-14V; power consumption max. 30 W
    Cooling Box: 230V 50 Hz (115V by request) or 12V battery (solar battery with at least 90 Ah)
    Power requirement / number of samples Sampler:
    Up to 2000 sample extractions per battery charge, according to ambient conditions. Cooling Box:
    Power requirement with option "active cooling" approx. ... according to ambient conditions. Aprox.. 50W.
    (with 90 Ah battery, 20°C ambient, sampling 3x/h = running time of cooling system aprox. 49h)
    Ambient temperature 0 – 45° C
    Sample temperature 0 – 40°C
    Standards CE Sampling according to ISO 5667-10, EN16479
    Wetted materials PC, PVC, Silicone, PS, PE
    Manufacturer P/n2054024
    Your basket is empty