Your basket is empty
BROWSE OUR PRODUCT CATALOGUE

Thermo Bottle-Top Filter Cap. 150ml 9045952

Product Detail

< Back

Thermo Bottle-Top Filter Cap. 150ml 9045952
PART NO. 4AJ-9045952
In Stock: 5
List Price: €6.61

BUY MORE SAVE MORE
Qty 5 to 9 = 5% Discount
Qty 10 to 19 = 10% Discount
Qty 20 + = 20% Discount


Bottle-top filters
SFCA membrane
Nalgene®
Capacity: 150ml
Neck thread: 33GL
Pore size: 0.45µm
Membrane diam.: 50mm
Pack of 1

Tissue culture filters for screw fitting onto bottles with 33mm neck diameters
With surfactant-free cellulose acetate membrane (SFCA) and polystyrene (PS) housing
Gamma-irradiated sterile
Pyrogen free
Non cytotoxic
Low-pressure filtration can be carried out directly into a suitable sterile bottle
Caution: Only use sterile bottles authorised for use in low pressure applications
Always wear protective equipment for low pressure procedures
The membrane is characterised by its low protein binding good throughput rates and minimal clogging with negligible protein loss
Permanent moulded graduations
Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6mm to 9mm
Lot number catalogue number membrane type pore size and expiration date are printed
on filter units bottle tops and receivers for easy identification and lot traceability

Bottle Top Filters Nalgene™ Rapid-Flow™, SFCA Membrane, sterile
Tissue culture filters for screw fitting onto bottles with 33mm or 45mm neck diameters. With surfactant-free, cellulose acetate membrane (SFCA) and polystyrene (PS) housing. Gamma-irradiated sterile. Pyrogen free. Non cytotoxic. Low-pressure filtration can be carried out directly into a suitable sterile bottle. Caution: Only use sterile bottles authorised for use in low pressure applications. Always wear protective equipment for low pressure procedures. The membrane is characterised by its low protein binding, good throughput rates and minimal clogging with negligible protein loss. Permanent, moulded graduations. Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6mm to 9mm. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.

Product Specification:
Product Type: 290
Capacity: 150ml
Neck thread: 33 GL
Pore size: 0.45 µm
Membrane diam.: 50mm

ManufacturerThermo
Manufacturer P/n290-3345
Fisher Ref9045952
VWR Ref734-5062
Search words

Disposable filter units

Filters bottle-top

Copyright 2013 Lab Unlimited Sitemap | Terms & Conditions | ! Product images are for illustrative purposes only !