+353 (0)1 4523432
| Pumps, vacuum / pressure, diaphragm, for gel dryers Highly efficient and oil-free. Inlet separator and exhaust condenser supplied -quiet running -continuous, totally oil-free pumping of gases -components in contact with gases are manufactured in chemical-resistant materials -with gas ballast for reducing condensates -Optimum service life, easy to exchange diaphragm and valves -compact design with small footprint -close to 100% solvent recovery -easy to maintain -supply requirements: 230V 50/60Hz MZ 2C NT +AK+EK: Simple use (Gel dryer) Ultimate pressure 7 / 12mbar. Vacuum for gels, which were previously evacuated using water jet pumps, e.g. sequencing gels, SDS-PAGE up to 10%. MD 4C NT +AK+EK: Multiple use (several gel dryers) with VACUU·LAN® local vacuum network Ultimate pressure 1.5 / 3mbar. For high-boiling point solvents at low temperatures and/or gradient gels, SDS-PAGE >10 %. MD 1C +AK+EK: Simple use (Gel dryer) Ultimate pressure 2mbar. Space-saving and compact solution, for high-boiling point solvents. Product Specification: Product Type: MZ 2C NT +AK+EK Flow rate: (50/60Hz) 33.33 / 38.33 L / min. Ultimate vacuum: 7 / 12 mbar | |
| Catalogue Number | 6.234 067 |
| Manufacturer | Vacuubrand |
| Manufacturer P/n | 20732600 |
| VWR Ref | 181-1044 |
| Dimensions (W x D x H) mm | 242 x 326 x 402 |
| max. discharge flow m³ / hr. | 2.0 / 2.3 |
| Ultimate vacuum without / with gas ballast mbar (abs.) | 7 / 12 |
| Type | MZ 2C NT + AK + EK |
| Connector | CEE |
| PK | 1 |
| VWR: | 181-1044 |