Home > Riggtek DissoPrep X8 Media Prep Station DPX8-3

Riggtek DissoPrep X8 Media Prep Station DPX8-3

PART NO: 6-DPX8-3

Qty In Stock: 1

Dissolution Media Preparation Station DissoPrep X8 3rd generation

USP and FDA compliant Mixing, Heating, Degassing, Dispensing of Dissolution Media and Printout of executed results (USB, LAN, parallel interface). Printer not included.
8 liter tank for dispensing of up to 7 vessels with 1000mL in one batch.
This unit comes complete with Browser-Interface (Remote Control Software of the 3rd generation) for Remote Control of Methods, Protocols/Reports and User Administration, and View of Audittrail, vailid for one serial number.
The Browser-Interface is installed and executed on the DissoPrep, and is controlled via Web-Browser with User-Login. No software-installation required on any PC. Only network connection and web browser required. Tablet connection is possible.
(CTN 9026.9000)

Specification

Dimensions & Weight: W30 x H65 x D60 cm, 26 kg

Dimensions Box: L840mm x W745mm x H480mm

Dimensions Pallet: L1200mm x W800mm x H600mm,38kg

Power supply available for: All Voltages, German Power Cord Plug included - no adapters for other countries included

Voltage Supply and Power Rating:230V, 50/60Hz, 1.85kW, 115v, 50-60Hz, 1.85kW, 100V, 50/60Hz, 1.5kW - Please note the specific voltage on your purchase order

PC Interfaces: PC Interface RS-232 (serial: COM1 and COM2; LAN; Optional: PC sOFTWARE (21 CFR Part 11 compliant)

Printer Interface:Centronics (LPT parallel), USB; PCL-5 and PCK-6, ASCII font

Output Channel: 1 dispense output; Optional: Remote Control Nozzle

Input Filter:PP Cartridge Filter 20µ

Input Channels: 2 Inputs (Water/premixed media line, additive line);Input pressure max 0.1 bar)

Max. Acid Concentration: 36% hydrochloric acid at the additive input line (~3N); 0.5% hydrochloric acid at the medium input/output line (~0, IN)

Dosing Principle: Gravimetric

Calibration: Manual/ Automated calibration capabilities with Protocol consolidation of the calibratio intruments

Storage Volume: 8.000g net, apportionalble from 1-36 vessel, 11.000g gross

Prefill Volume: 1.500g (necessary for prefilling the tank)

Preheating: till 45°C (setting in 0.1°C digits)

Temperature Accuracy: < 1,5°C at 32°C to 37°C and > 5.000g, monitored

Mixing Unit: Magnetic Stirrer, funtionally monitored

Additive Mixing: 1:3 -1:100 (33% to 1%) (setting in 0.1g digits) Max. 1.000g Additive per vessel

Mixing Accuracy: <0.5% of ratio 1:3 - 1:100, typ. o.2%, monitored

Degassing: Vacuum typ. <100mbar pressure absolute, monitored <5.5ppm, typ. 3.5-4.5ppm

Throuhput: 24-32l/h, 400-533ml/min

Dosing Rate: 2.000ml/min

Dosing Volume: 100g-8,000g (setting in 1g Digits)

Dosing Accuracy: <1& at 500-8.000g, typ. 2g, monitored

Autowash: Volume and number of cycles selectable 1 cycle, 1.500g, typ. 7-8min

Transport requirements in warranty cases: Transport unit flat lying with front to the left & in original package. Label package visibly to avoid transport damages.Transport by lift track (CTN 9026.8020)

Specifications are subject to change without prior notice, current specifications see in the related Operation Manual (operation manual in English).