Your basket is empty
Home > YSI Pro Digital ODO/T probe and cable assembly 20m 627200-20

YSI Pro Digital ODO/T probe and cable assembly 20m 627200-20
Enlarge

YSI Pro Digital ODO/T probe and cable assembly 20m 627200-20

PART NO: X-627200-20
Price: €1,008.57

Pro Digital ODO/T probe and cable 20m.

The Pro DIGITAL ODO/T probe and cable assembly features integral optical dissolved oxygen and temperature sensors. Cable lengths are available up to 100 meters.

The ODO/T probe assembly pairs with the ProSolo Handheld to form a complete sampling system.

Featuring integral, digital sensors, the ODO/T is plug-and-play which minimises time spent on instrument setup. Pro DIGITAL technology allows the handheld to automatically recognise connected sensors, so there is no need to tell the instrument what is connected.

Optical Dissolved Oxygen (ODO) technology is non-consumptive, meaning oxygen is not consumed during the measurement. Flow dependence is non-existent and no stirring is required, resulting in the most accurate DO measurements available from a probe. The ODO sensor is not susceptible to interferences from other gases, drifts less and holds calibration longer than membrane covered sensors. Maintenance is a breeze with a simple, threaded optical cap that is good for at least two years.

The Pro DIGITAL ODO/T probe and cable assembly features include:

  • Integral optical dissolved oxygen, and temperature sensors that are auto-recognized by Pro DIGITAL handhelds, reducing instrument set-up time
  • Rugged Optical DO sensor cap with a 2-year warranty is pre-installed on new assemblies
  • Military Spec (MS) connector and a weighted, stainless steel probe guard
  • Fits in a 1 inch well with cable lengths up to 100 meters
  • 2-year warranty on cable, sensors, and ODO cap




Accuracy:

  • Temperature: ±0.2 °C
  • Dissolved Oxygen: 0 to 200%: ±1% of reading or 1% saturation, whichever is greater 200 to 500%: ±8% of reading 0 to 20 mg/L: ±0.1 mg/L or 1% of reading, whichever is greater 20 to 50 mg/L: ±8% of reading

Measurement Method / Channels:

  • Temperature: Thermistor;
  • Dissolved Oxygen: Optical luminescence - lifetime method

Measurement Range:

  • Temperature: -5 to 70 °C (temperature compensation range for DO mg/L measurement: -5 to 50 °C )
  • Dissolved Oxygen: 0 to 500%, 0 to 50 mg/L

Parameters Measured: Dissolved Oxygen, Temperature

Size: Width - 2.46 cm (0.97 in.)

Unit of Measure:

  • Temperature: °C, °F, K;
  • Dissolved Oxygen: % saturation, % saturation local, mg/L, ppm

Warranty: Warranty 2-year probe and cable assembly; 2-year extended warranty ODO sensor cap


Used with: ProSolo and ProDSS. Will not work with legacy ProODO handheld.
Manufacturer P/n627200-20
Your basket is empty