|Gel electrophoresis tank VS20 Wave Maxi|
Designed to perform a variety of separations, including first- and second-dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis, plus capillary tube gel IEF and electroblotting, the VS20 WAVE is one of the most versatile maxi vertical systems available.
By introducing innovative, new vertical screw-clamp technology only four screws are now necessary to secure as many 20x20cm gels. This gives the VS20 WAVE Maxi the selective advantage of a much faster set up speed compared to competitor products whose traditional clamping configurations require as many as 24 screws to secure just two glass plates. In addition, the WAVE's vertical screw-clamp configuration distributes pressure evenly along the height of the gel rather than in the centre to eliminate plate bowing and gel compression, but still maintains a leak-proof seal during casting; while the ergonomic wave-like design aids both handling and set up.
Whatever your requirements are the WAVE can be made to meet them. Regardless of whether it is running 2 or 4 gels, electroblotting, and IEF using capillary tube gels or IPG strips, all of these techniques may be performed using the same omni-purpose unit while retaining the benefits of large format electrophoresis, such as extended separation distances, greater sample throughput and superior resolution.
VS20WAVESYS incl. VS20 WAVE Maxi, Glass plates, 2 x 24 well combs, cooling coil, casting base
VS20WAVESYS-CU incl. VS20 WAVE Maxi, 20 x 20cm Dual, 2 sets of Glass Plates, 1mm thick bonded spacers, 2 x 24 sample, 1mm thick combs, cooling coil, dummy plate, caster, external casting upstand
VS20CBS incl. WAVE Maxi Vertical Unit, 2 x 4mm thick notched glass plates, 2 x 4mm thick plain glass plates with 1mm thick bonded spacers, 1 x dummy plate, 2 x combs (1mm thick 24 samples), 1 x casting base, silicone mat, cooling pack;
plus: 1x WAVE Standard Electroblotting Module which includes: WAVE Maxi Platinum Wire Blotting Insert, 4 x compression cassettes and 18x fibre pads
Gel dimensions (W x L) :
Gel dimensions (W x L) VS20CBS: 20 x 20cm
17.5 x 18cm
Unit dimensions (W x D x H): 30 x 18 x 27cm
Max. sample capacity: 2 x 48 samples
Buffer volume VS20CBS: min. 4.8l (4 gels), max. 5.3l (2 gels)
min. 5.3l, max. 6.4l
Description: Plain glass plates with bonded spacers
Thickness: 0,75 mm
Sample volume: µl
|Description||Plain glass plates with bonded spacers|
|Sample volume µl||0.75|
Gel electrophoresis tank Accessories
VS20 Wave Maxi