|Temperature controllers, TEMPAT®-D|
For controlling temperature of heating coils, hotplates, ovens, infrared radiators and water baths. TEMPAT®-D has a 10mm high, LED display which can even be seen in dark rooms and allows monitoring of actual temperature at any time. Set point can be entered via a 3 or 4 figure coding switch with 1°C resolution. Built-in sensor breakdown fuse, switching interval display and Xp trimmer to adjust variable gain amplification between 0 and 10K. Sensor connection is via a plug-in socket.
Appropriate temperature sensor please order separately.
If no temperature sensor is ordered, a loose plug is supplied.
Input: 230V, 50/60Hz
Switching capacity: 2300W, 10A
Connection, appliance: 1.20M long connection cable with impact resistant plug
Consumer load: earthed schuko socket, other plug-in connections in accordance with Swiss or French/Belgian standards, for example can be supplied at additional cost.
Housing: Polycarbonate plastic, gray
Dimensions: 188mm x 110mm x 70mm
On/off switch: via dipole luminous rocker switch
Probe connection: via socket
Contact assignment Pt100: 1 and 2
Contact load: 1 + 3
Accuracy: ±1% from measuring range value
For Probe: NiCr-Ni
Temp. range: 0 ... 1200 °C
|Temp. range °C||0 ... 1200|