|Chemistry Vacuum Systems NT|
Compact design, ready to use, no set-up required. Constructed in highly chemical resistant materials. Quiet operation.
-100% oil-free pumping of gases
-gas ballast as standard for working with condensable vapours
-good ultimate vacuum even with gas ballast
-high vapour tolerance for water and solvents
-long service life, low maintenance
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 NT(two-stage) / 610 NT(three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 NT(two-stage) / 611 NT(three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 NT(two-stage) / 620 NT(three-stage) : with AK + EK; 2 electronically controlled vacuum ports
Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK:
e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK:
Well-proven unit for a wide range of applications for the single-user, e.g. gel drying, vacuum for gels that were previously dried using water-jet pumps, e.g. sequence gels, SDS-PAGE up to 10%. For low-boiling-point solvents.
MD 1C +AK+EK:
Space-saving single-user configuration with 2 mbar ultimate vacuum. For high-boiling-point solvents.
MD 4C NT + AK+EK:
Larger or multi-user applications (e.g. several gel dryers) in a local-area vacuum network (VACUU·LAN®). 1.5 / 3 mbar ultimate vacuum. For high-boiling-point solvents and/or gradient gels, SDS-PAGE >10%.
MV 10C NT +EK:
Four-stage diaphragm pump with exhaust vapour condenser. 0.9mbar ultimate vacuum. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.
With vacuum controller:
PC 510 NT / 511 NT:
Well-proven units for a wide range of processes in chemistry laboratories, e.g. all *classical* low-boiling-point solvents. 7 / 12mbar ultimate vacuum.
The PC 511 NT has an additional, manually controlled, vacuum port.
PC 610 NT / 611 NT:
Well-proven units for vacuum generation and control up to 1.5 / 3mbar ultimate vacuum, including high-boiling-point solvents.
The PC 611NT has an additional, manually controlled, vacuum port.
PC 520 NT / 620 NT:
Synchro chemistry pumping units with two, independent, vacuum controllers for running two separate processes. PC 520 with 7 / 12mbar ultimate vacuum, PC 620 NT with 1.5 / 3mbar ultimate vacuum.
Product Type: MZ 2C NT +AK SYNCHRO +EK
Flow rate: (50/60Hz) 33.30 / 38.30 L / min.
Ultimate vacuum: without / with gas ballast 7 / 12 mbar (abs.)
Dimensions (W x D x H): 248 x 326 x 402 mm
|Dimensions (W x D x H) mm||248 x 326 x 402|
|max. discharge flow m³ / hr.||2.0 / 2.3|
|Ultimate vacuum without / with gas ballast mbar (abs.)||7 / 12|
|Type||MZ 2C NT + AK SYNCHRO + EK|
Pumps chemistry stands
Vacuum pumps chemistry