Your basket is empty
Home > Life Science > Microbiology > Cultivation > Cloning cylinder, PS, sterile > Bel-Art Cloning Cylinder PS Sterile 9.5 x 11 mm F37847-0300

Bel-Art Cloning Cylinder PS Sterile 9.5 x 11 mm F37847-0300
Enlarge

Bel-Art Cloning Cylinder PS Sterile 9.5 x 11 mm F37847-0300

PART NO: 4AJ-6270371
Price: €154.11

BEL-ART Cloning cylinder, PS, sterile, 9.5x11mm, pack of 50

These cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37ºC (98.6ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.

- Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surface
- Polystyrene cloning cylinders are supplied in sterile packs
- Three sizes: 4.7mm I.D. x 8mm H, 6.4mm I.D. x 8mm H and 9.5mm I.D. x 11mm H
- Packed 10 per bag, one size

Cloning cylinder, PS, sterile
These cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37ºC (98.6ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.

-Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surface
-Polystyrene cloning cylinders are supplied in sterile packs
-Three sizes: 4.7mm I.D. x 8mm H, 6.4mm I.D. x 8mm H and 9.5mm I.D. x 11mm H
-Packed 10 per bag, one size

Product Specification:
Product Type: Cloning Cylinders: 9.5mm I.D. x 11mm H

Catalogue Number6.270 371
ManufacturerBel-Art
Manufacturer P/nF37847-0300
TypeCloning Cylinders: 9.5 mm I.D. x 11 mm H
PK50
Your basket is empty