"WTW" (1041 results)

Standard solution 2 for calibration of arbitrarily equipped VARiON®

Combined standard 2 (high concentration)
- Volume 1000 ml

pH combination electrode

Design according to the minimum requirements for measuring instruments used at waste water treatment plants defined by ATV (waste water association) in bulletin M256

pH combination electrode
- With solid electrolyte for heavily loaded municipal and industrial waste water

Equipped with the following features:
- Gel polymer solid electrode, AGCl free
- Hole junction
- Connection via watertight plug head connector

Measuring range:
- 2 ... 12 pH
- 0 ... 60 °C
- 10 bar/20°C
- 1 bar/60°C

Electrolyte:
- Gel polymer solid electrolyte (AgCl-free)

Junction:
- Hole junction

Connection:
- Watertight plug head connector

pH combination electrode

Design according to the minimum requirements for measuring instruments used at waste water treatment plants defined by ATV (waste water association) in bulletin M256

pH combination electrode
- With solid electrolyte for normally loaded municipal and industrial waste water
- To be connected to the sensors SensoLyt® 650, 690 and 700 (IQ)

Equipped with the following features:
- Gel polymer solid electrode, AGCl free
- Hole junction
- Connection via watertight plug head connector

Measuring range:
- 2 ... 12 pH
- 0 ... 60 °C
- 6 bar/20°C
- 1 bar/60°C

Electrolyte:
- Gel polymer solid electrolyte (AgCl-free)

Junction:
- Hole junction

Connection:
- Watertight plug head connector

Cable adapter

Adapter for direct mounting of conductivity cells series TetraCon 700 and LRD to QuadroLine series LF 296 monitors

Connection box

Connection box as wallmounting device
- For high impedance plug head electrode (pH/ORP) use on IQ SENSOR NET Systems
- AS7/S-connection cable and TFK 150/325 temperature sensor necessary (Sold seperately)
- Wall mounting

Protection:
- IP 65

Dimensions (W x H x D):
- 240 x 165 x 95mm

Tubing set

Set of pump tubing for PurCon® permeate pump

Standard solution

1.0 l standard solution B (0.4 mg/I NO2-N) for TresCon® modules ON 510, TresCon® N 511 and TresCon® Uno TCU/N511.

Set of maintenance kit (fittings and spare tubes) for TresCon phosphate analyzer module OP 210 (resp TresCon P211..and TCU/P211..)

Set of maintenance kit (fittings and spare tubes) for TresCon ammonium analyzer module OA 110 (resp. TresCon A111 and TresCon Uno/A111)

Set of maintenance kit (fittings/spare tubes) for TresCon nitrate and nitrate/SAC analyzer module ON/OS 210 (resp. TresCon N/S 211/TCU Uno/S 211)

The SenTix® Sp is an analog pH electrode for food measurement. This is a spear-type pH combination electrode that is used for penetration measurements in meat, fruit, and cheese. Comes with a S7 plug head and does not include the cable.

Key Advantages:

• Low resistance membrane glass for reliable measurements
• Spear-type membrane makes penetration simple
• Easy to clean junction

The SenTix H is a precise pH combination electrode with group diaphragm for high alkali ranges, high salt concentrations, a length of 165mm, comes with a S7 plug head, and without connection cable. The recommended applications include ammonia, bleach solution, developer, fixing baths, detergents, lyes, seawater and suspensions. The electrode can also be used for many other applications such as acids, beer, beverages, coffee extract, cosmetics, dispersion colours, drinking water and much more.