+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Life Science
- Cell Culture
- Cell Manipulation
- Centrifuge
- Cooling
- Filtration
- General Laboratory Consumables
- Genomics
- Concentration
- DNA and RNA isolation
- DNA-Electrophoresis
- Electroporation
- Gel-Documentation
- PCR Cabinet
- PCR Equipment
- 24 / 48 well PCR Plates, non-skirted, PP, for qPCR
- 32-well PCR rack, PP
- 40/168-well PCR Rack, PP
- 96 well PCR plates FrameStar®
- 96 well PCR-Plates, PP, for PCR or qPCR
- 96-Well PCR Rack, PP
- 96-Well PCR Rack, PP
- 96-Well PCR® Rack, Low-Temp
- AccuSeal Semi-Automated Plate Sealer
- Automatic Plate Heat Sealer ALPS 5000
- Cap strips, PP
- Clear Seal
- Clear Seal MkII
- CloneSaver™ Cards
- DMSO Resistant Peel Seal
- Eppendorf twin.tec PCR plates 384
- Fast PCR-Tubes 0.1 ml, 8 tube-strips with separate cap strip
- FTA Card Accessories
- FTA® Cards
- Heat sealing films, aluminium
- Heat sealing films, PE
- Isolation kits DNA/RNA, magnetic beads
- Isolation of viral RNA and DNA
- Isolation of viral RNA and DNA
- Lids for microtitration plates
- LLG-96-well PCR Plates, PP
- LLG-PCR adhesive film and foil
- LLG-PCR tubes with attached lids, PP
- LLG-PCR-Tubes, 8 Strips with attached individual caps, PP
- LLG-PCR-Tubes, 8 Strips, PP
- Manual Heat Sealer for Microplates ALPS 50V
- Micro plates Riplate® magnetic
- OmniTray, PS
- PCR box and PCR rack, PP
- PCR cap strips
- PCR cap tool, PA
- PCR Mini cooler, PP
- PCR Plates 384 well, Rigid Frame
- PCR Plates 96 well, Rigid Frame
- PCR plates, 96 well, Eppendorf twin.tec®, BioBased, PCR clean
- PCR plates, 96/384 well Eppendorf twin.tec®
- PCR Plates384-well
- PCR Tube Strips and Cap Strips
- PCR tubes strips, PP, with attached individual caps
- PCR tubes, 0.2ml and 0.5ml, thin-walled and accessory tray and frame
- PCR-Coolers
- PCR-Coolers
- PCR-Tube Cryobox
- Peel Seal
- qPCR-Kits and Regents, Delta-Seek
- Racks for magnetic nanoparticle based separations
- Real-time PCR-system Prime Pro 48
- Sealing Film
- Sealing paddle for sealing films, PE
- Single PCR tubes with attached caps, PP
- Spin Columns, glass fiber filter
- Storage Plates
- Strips of 8 PCR tubes with attached cap strips
- Strips of 8-/12- PCR tubes plus detached cap strips, PPautoclavable
- Support stands for PCR Cabinets Type Streamline ® / Airstream ®
- Thermocycler MultiGene™ OptiMax
- Water, nuclease-free
- Work trays for PCR
- Thermocycler
- Heating
- Histology
- Isolation Chamber
- Liquid Handling
- Microbiology
- Microscopy
- Molecular Cell Biology
- Occupational Safety
- Pipetting Aid Software
- Proteomics
- Sample Preparation and Sample Treatment
- Shaking and Mixing
- Spectrophotometer
- Sterilisation and Cleaning
- Stirring
- Vials, Caps & Test Tubes
- Virus Research
- promotions
- Ultra Violet Sanitisation
Manual Heat Sealer for Microplates ALPS 50V
The ALPS 50V provides a safe, controlled method of sealing sample plates made from various plastics. The sealer is adjustable for both sealing time and temperature and gives a visual countdown display during the sealing process. The ALPS 50V can seal deep well plates (Bioblocks) with various thermal sealing plastic or foil films and may be adapted to seal Microplates and PCR plates by using a suitable plate carrier.
| Specification | |
| Temperature Set Point Range: | 125 to 200 °C in 1 °C increments |
| Time Set Range: | 1 to 9 sec. in 0.5 sec. increments |
| Operating Humidity Range: | 20 to 80 % non-condensing |
| Operating Temperature: | 18 to 30 °C |
| Size (W x D x H): | 220 x 321 x 425 mm |
| Weight: | 7.2 kg |
| Power Supply: | IEC 320, 100-130 VAC, 50/60 Hz or 220-240 VAC, 50/60 Hz, max. 350 W |
| Standards: | FCC Class A, CFR 47 Part 15 BS EN 61326:1998 |
