Your basket is empty
BROWSE OUR PRODUCT CATALOGUE

Product Categories

LaboStar™ RO/DI

The LaboStar™ RO/DI series produce high quality water with very low energy consumption. The use of "low energy" membranes enable a very efficient and economical operation. All LaboStar™ RO and RO/DI systems are equipped with a built-in 7 l storage tank. Pure water is collected in the tank and is recirculated by an integrated pump. LaboStar™ RO produces Type III water. LaboStar™ RO/DI is equipped with an additional final DI cartridge. This cartridge polishes the RO water to Type II quality < 0.1 µS/cm. Both units offers two extraction ports: water can be extracted under pressure from the Point-of-use dispenser or from the outlet on the back of the unit. Optionally, a charged 0.2 µm sterile filter at the dispenser can be used to remove bacteria and endotoxins. An uncharged 0.2 µm sterile filter is also available. The 7 l storage tank capacity can be increased by an additional 30 or 60l tank. Pure water is collected in the tank and is recirculated by an integrated pump. The LaboStar™ RO produces Type III water with a salt retention rate of up to 98%. LaboStar™ RO produces Type III water. LaboStar™ RO/DI is equipped with an additional final DI cartridge. This cartridge polishes the RO water to Type II quality < 0.1 µS/cm. Both units offer two extraction ports: water can be extracted under pressure from the Point-of-use dispenser or from the outlet on the back of the unit. Optionally, a charged 0.2 µm sterile filter at the dispenser can be used to remove bacteria and endotoxins. An uncharged 0.2 µm sterile filter is also available. LaboStar™ RO/DI systems are delivered with the first set of all modules and filters required for immediate operation.

  • Pure water circulation right into the dispenser head
  • Easy to dispense water using the practical dispenser
  • 0.2 µm sterile filter with or without endotoxinretention as availableoption
  • Whisper operation mode
  • Rapid and simple disinfection
  • Conductivity monitoring of RO and DI water
  • Easy module exchange via quick-release connections
  • Small and compact

LaboStar™ RO/DI
Specifications
Permeate production rate at 15&deg;C:10 l/h
Permeat conductivity:depending on tap water (RO Version) /
<0.1 (DI Version)
Bacteria:1 KbE/ml (with a 0.2 µm sterile filter)
Particle >0,1 up to 1&micro;m:< 1 per ml
Feed water conductivity:< 2000 µS/cm
Silt densitiy index SDI:< 3
Dimensions (W x D x H):290 x 400 x 535 mm
Power supply:100-240 V, 50/60 Hz

LaboStar™ RO/DI



Evoqua Water Technologies LaboStar 10 RO DI W3T324493
PART NO.4AJ-6267636
14502||63632||54248||14898
Type||Pure water output at 15°C L / hr.||Weight kg||PK
LaboStarä RO DI 10||10||23||1
Evoqua Water Technologies
W3T324493
LABOSTAR10

Reverse osmosis systems

Water purification reverse osmosis systems

0
6
0
1
Out of Stock

Copyright 2013 Lab Unlimited Sitemap | Terms & Conditions | ! Product images are for illustrative purposes only !