+353 (0)1 4523432
PTV 2000 Online Turbidity Meter Red LED / EPA
Turbidity is the key measurement parameter for determining drinking water quality. Lovibond Tintometer asked a team of globally recognized turbidity experts to create a new process instrument that addressed all the issues customers struggle with using their turbidity systems. With these advancements and addition of state-of-the-art communications and user interface, the PTV Series was created for the next generation of process turbidity meters.
The development of the PTV Series considered every aspect of process turbidity workflow. It has looked at the installation and set up; the daily measurement and control; the routine procedures such as calibration, verification and maintenance as well as the collection of data and management.
Sample Management Simplified:
The Fluidics Manager on the PTV 2000 is an additional accessory that can streamline samples flowing into and out of the instrument. It eliminates the need to install and maintain separate devices to control the sample entering and exiting the sensor. It controls the sample flow rate into the flow body and can easily drain the flow body for management and cleaning purposes. There is no need for the user to create their own funnelling system to take out the sample if using the Fluidics Manager. This can be mounted to the instrument panel
Regulatory Compliant:
The PTV Series has instruments that meet EPA and ISO regulatory requirements. The instrument can easily be configured with additional features such as integrated flow indication, digital communication protocols and Bluetooth® connectivity. Everything the users need for calibration and verification protocols as well as other key accessories to provide a single source for turbidity measurement are supplied by Lovibond Tintometer.
Specifications: - Optics: Infrared Light - Power Requirements: 90 to 264 VAC, 50/60 Hz. Auto Select - Accuracy: ± 2 % of reading from 0 to 10 NTU/± 4 % of reading between 10 to 100 NTU - Stray Light: smaller 0.005 / 5 mNTU - Displayed Resolution: up to 0.0001 NTU (range dependent) or 5 digits displayed - Repeatability / Precision: better than 1% at 1 NTU - Initial Response: 10 % change: 15 seconds @ max flow - Step Response: (T-90), less than 240 seconds at 200 ml/min. at 1 NTU - Signal Averaging: User Selectable: 1, 3, 6, 10, 30, 60, and 90 seconds, defaulted to 30 seconds - Sample Temperature: 0 - 50 °C max sample temperature: 70 °C - Calibration: One Point Calibration at 5.0 or 20 NTU with any regulatory approved formazin - Sample Flow: 30 to 500 ml/min, optimal flow: 50 to 80 ml/min - Sample Inlet Connection: 1/4-inch NPT female, 1/4-inch compression fitting tubing (included) - Sample Outlet (Drain) Connection: 3/8-inch NPT female, 3/8-inch hose barb tubing (included) - Sample Inlet Tubing: 1/4-inch OD or 6 mm OD - Sample Outlet Tubing: 3/8-inch OD or 9 mm OD - Turbidity Meter Body Drain: Quick connect with integrated check valve - Analog Output: Measurement Module: 1 selectable 0 - 20 mA or 4 - 20 mA; output span programmable over any portion of the measurement range - Analog Output: Junction Box: 1 selectable 0 - 20 mA or 4 - 20 mA; output span programmable over any portion of the measurement range - Alarms: Three set-point alarms, each equipped with an SPDT relay with unpowered contacts rated 5 A resistive load at 230 V, AC - Digital protocol: 4-20 mA - Enclosure Type: Junction Box: Fiber reinforced polyester - Enclosure Rating: Junction Box: IP 66 - Safety: Listed by TÜV Rheinland to UL 61010A-1: Certified by TÜV Rheinland to CSAC22.2 No. 1010.1: CE Certified by TÜV Rheinland to EN 61010-1 - Immunity: CE certified by TÜV Rheinland to EN 61326 (Industrial Levels) - Emissions: Class A: EN 61326, CISPR 11, FCC Part 15, Canadian Interference-Causing Equipment Regulation ICES-003 - Mounting Hardware: Turbidity Meter Sensor - Slotted Mounting Bracket that can be affixed to any vertical surface or panel (Optional). Junction Box - Direct mounting to any vertical surface or panel (Optional) - Method of Verification: Wet Standards or dry verification device - Limit of Determination: 0 NTU - Limit of Detection: 0 NTU - Flow Indicator: no - Portability: Process - Environmental Conditions: 5 - 50 °C, rel. humidity 5 - 95 % (Non-condensing) - Compliance: ISO 7027 - Protection Class: IP 65 - Dimensions: 158.4 x 340.4 x 334.5 mm - Weight: 5 kg |