Standard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers.
For subsequent demineralization of reverse osmosis systems.
- pressure resistant to 10 bar
- optimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unit
- flow rates up to 700 litres/hour
- the unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and quality
- can be connected to the raw water network directly and without a pressure reducer
- resistant to alternating pressure
- hard rubber collars vulcanized to the base and top of the unit offer effective protection
- convenient transport thanks to the handles embedded into the top part of the unit
- conductivity is controlled directly on the unit (installed measuring equipment) or with remote location meter
- Also available with shut-off when the limit value is reached and limit control
E28d Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, complete with conductivity meter
E40d Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, complete with conductivity meter
E28dZ Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, spare cartridge
E40dZ Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, spare cartridge
E28dA Pressure resistant mixed-bed unit made of V4A special alloy, permanent pressure resistant to 10 bar, conductivity meter with limit switch and electrovalve
E40dA Pressure resistant mixed-bed unit made of nylon, permanent pressure resistant to 8 bar, conductivity meter with limit switch and electrovalve