Shore hardness testers, analogue, HB

Compact handheld durometer for plastics with drag indicator.

• Typical application: measurement of penetration (Shore)
• Material thickness of the sample, min. 4 mm
• Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are often not possible because of very narrow standard tolerances
• Shore A rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials and Shore D for plastics, formica, epoxides, plexiglass etc.
• Max mode: Holds the maximum value in the display
• Point mode: Shows one instant value
• Can be attached to the test stands TI-A0 (for Shore A) and TI-D (for Shore D)
• Screws to screw on to the TI: M7 fine thread
• Delivered in a wooden carrying case