+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Magnetic Stirrer and Stirring Hotplate
- Overhead Stirrer
- Overhead Stirrers
- Stirrer Heads
- Stirrers
- Additional Stirrer Blades for Bola Stirrer Shafts, PTFE
- Additional stirrer blades for stirrer shafts, PTFE
- Additional stirrer blades for stirrer shafts, PTFE, anchor
- Additional stirrer blades for stirrer shafts, PTFE, Impeller three-bladed
- Additional stirrer blades for stirrer shafts, PTFE, maxi propeller-three-bladed
- Additional stirrer blades for stirrer shafts, PTFE, moon-shaped blade
- Additional stirrer blades for stirrer shafts, PTFE, Propeller three-bladed
- Anchor stirrer for Overhead Stirrers
- Anchor stirrer, PTFE
- Anchor stirrers, stainless steel 1.4571
- Anchor stirring rotors, stainless steel
- Blade stirrer for Overhead Stirrers
- Blade stirrer, stainless steel 1.4571
- Bosshead R 270 for overhead stirrers
- BuddeMix Stirring System 1 - 4
- Centrifugal stirring rotors, 2-blade, stainless steel 1.4305
- Clamp holder SP
- Compressed air industrial stirrers BSR 64 with floor stand
- Compressed air powered stirrers, PLR, accessories
- Connection couplings
- Crescent-shaped stirring rotors, PTFE
- Cylinder oil
- Diagonal blade stirring rotors, 4-blade, stainless steel 1.4404
- Dissolver stirrers, stainless steel 1.4571
- Dissolver stirring rotors, stainless steel 1.4404
- Finger-operated oiler OT
- Half-moon stirrer for Overhead Stirrers
- Impellers VISCO JET®
- Moebius stirrer, stainless steel 1.4571
- Overhead stirrer rotors, centrifugal paddle, PTFE
- Overhead stirrer rotors, paddle
- Overhead Stirrer shafts
- Paddle stirring rotors, stainless steel
- Paddles
- Paddles, 3 blade propeller.
- Paddles, 4 blade propeller
- PLR compressed air laboratory stirrers up to 30 l for use in potentially explosive atmospheres, without tachometer
- PMC 120 compressed air container stirrers for Intermediate Bulk Containers (IBCs) up to 1500 L
- Propeller stirrer for Overhead Stirrers
- Propeller stirrer with guide ring for Overhead Stirrers
- Propeller stirrers, 4-blade, stainless steel 1.4571
- Propeller stirring rotors, 3-blade, stainless steel 1.4305
- Propeller, 3 blades, PTFE, angular
- Propeller, 3 blades, PTFE, round
- Rods for stirrer rotor shafts, M6, M8 and M10 screwthread end
- Rotor shields
- Safety limit switch SI 400
- Speed regulation valve V
- Spiral stirrer, stainless steel 1.4571
- Stands
- Stirrer shafts
- Stirrer Shafts with One Paddle, PTFE
- Strap clamps RH 3 for overhead stirrers and Dispersers T 18 and T 25
- Support holder
- Telescopic stand R 474 for RW 47 digital
- Turbine stirrer for Overhead Stirrers
- Turbine stirring rotors, 3-blade with guide ring, stainless steel 1.4305
- Shakers & Mixers
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Additional stirrer blades for stirrer shafts, PTFE
Useful extension to the existing range of Bola stirrer shafts. The additional blades can optionally be fixed in your preferred position on every stirrer shaft with diameter 8,10 or 16 mm (a flat spanner is included). The stirrer blades are entirely made of PTFE, the mounting devices are made of a special PTFE-compound. A high chemical and thermical (-200 to 250 °C) resistance is assured. This "building block system" allows the user to define a stirrer of their own special requirements.
