+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Analytical Systems for Environmental and Food Analysis
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Accessories Data and electronics for Photometer PrimeLab 2.0
- Accessories for AQUALYTIC® photometers
- Accessories for photometer photoFlex® series and turbidimeters Turb® 430 series
- Accessories for Photometer PrimeLab 2.0
- Accessories for Photometers PrimeLab 1.0
- Accessories NANOCOLOR®
- Accessories NANOCOLOR®, membrane filtration
- Accessories NANOCOLOR®, Standard rectangular cuvettes
- Cells for Photometer photoLab®
- Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
- Conductivity cell probes for purified and ultra-pure water, starter kit, for PrimeLab 2.0
- Conductivity cell probes, for PrimeLab 2.0
- Conductivity cell probes, starter kit, for PrimeLab 2.0
- Cuvettes for Photometer PrimeLab 2.0
- Cuvettes for photometers
- Digestion Reagents for Photometer photoLab® and pHotoFlex®
- Disposable syringes for Photometer PrimeLab 2.0
- Handheld photometers pHotoFlex® series, with / without pH and turbidity measurement
- LLG Photometers PrimeLab 1.0
- ORP electrodes for PrimeLab 2.0
- ORP Electrodes Starter Kit For PrimeLab 2.0
- pH electrodes for PrimeLab 2.0
- pH electrodes for PrimeLab 2.0, refillable
- pH electrodes, starter kit, for PrimeLab 2.0
- pH electrodes, starter kit, for PrimeLab 2.0, refillable
- Photometer NANOCOLOR® VIS II / NANOCOLOR® UV/VIS II
- Photometer photoLab® and pHotoFlex®, stored test programs
- Photometer photoLab® and photoFlex®, stored test protocols
- Photometer PrimeLab 2.0 SOLO
- Photometer PrimeLab 2.0 starter-kit
- Photometer PrimeLab 2.0 starter-kit, all parameters activated
- Photometer PrimeLab 2.0 starter-kit, all parameters activated, except turbidity (NTU)/PTSA/fluorescein
- Photometer PrimeLab 2.0 starter-kit, with turbidity (NTU)
- Photometer system MD 600 / MD 610
- Photometer system MultiDirect
- Photometers AL100
- Photometers AL100 Boiler Water, Cooling Water
- Portable UV254 Analyser
- Reagent powder for Comparators and Photometers Lovibond®
- Reagent sets drops
- Reagent sets powder
- Reagent sets tablets
- Reagent solutions for photometers Aqualytic
- Reagent tablets for Photometer Lovibond®
- Reagent tablets for photometers Aqualytic
- Reagents for Photometer MD 100 Boiler Water/Cooling Water
- Reagents VARIO for Photometer Aqualytic and HACH®
- Reference Standard Kit
- Reference standard kit pH for photometers MD series
- Reference standard kits Chloride for photometers MD series
- Reference standards for Photometer PrimeLab 2.0
- Tube tests NANOCOLOR® Part 1
- Tube tests NANOCOLOR® Part 2
- UV Spectral Sensor
- UV254 Absorption Photometer
- Waste Water Set-Up MD 610
- Special Distillation
- Turbidity
- Sample Preparation
- Sample Transport and Storage
- Texture
- Trace Analysis
- Water Purification
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Photometer system MultiDirect
With Dual Beam Technology. The MultiDirect is a modern, microprocessor-controlled photometer with ergonomically designed keypad and large-format graphic display. It is equipped with a wide range of pre-programmed methods (e.g. ammonia, COD, phosphate) based on the proven range of Lovibond® tablet reagents, liquid reagents, vial tests and powder reagents. The calibration and software-supported control options mean that the unit is also suitable for use as a testing instrument. The seven standard rechargeable batteries (supplied) ensure easy mobile use.
- Wide range of pre-programmed methods
- Large, graphics display
- RS232 interface
- Suitable for use with standard rechargeable batteries
- Updates for new methods and languages via the Internet
- 1000 data set memory
- Custom method recall is also possible
Scope of supply: MultiDirect, ready-to-use incl. 7 x rechargeable batteries and battery charger for 100 - 240V, 3 each 24mm and 16mm cuvettes, 16mm cuvette adapter, 3 x syringes, 1 x 100ml plastic beaker and case with waterproof insert. Without reagents and without battery (please order separately).
Verification Standard Kit: The verification standard kit for the MultiDirect is designed to reassure the user about the accuracy and the reliability of the results. The shelf life of the standard kit is two years from the date of production, provided that storage and use are in accordance with the instructions provided. Measurements are taken in mAbs.
| Specifications Optics: | Dual-Beam Technology, High-quality Interference Filters |
| Measuring time: Power supply: | approx. 10 seconds 7 Ni-MH-battery pack (1.5V AA), charged in the unit using external power pack |
| Dimensions (W x D x H): Ambient operating conditions: Approval: | 265mm x 70mm x 195mm up to max 90 % humidity (non condensing), approx. 5 ... 40 °C CE |
| Wavelengths: | 430/ 530/ 560/ 580/ 610/ 660nm |