+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Analytical Systems for Environmental and Food Analysis
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Accessories Data and electronics for Photometer PrimeLab 2.0
- Accessories for AQUALYTIC® photometers
- Accessories for photometer photoFlex® series and turbidimeters Turb® 430 series
- Accessories for Photometer PrimeLab 2.0
- Accessories for Photometers PrimeLab 1.0
- Accessories NANOCOLOR®
- Accessories NANOCOLOR®, membrane filtration
- Accessories NANOCOLOR®, Standard rectangular cuvettes
- Cells for Photometer photoLab®
- Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
- Conductivity cell probes for purified and ultra-pure water, starter kit, for PrimeLab 2.0
- Conductivity cell probes, for PrimeLab 2.0
- Conductivity cell probes, starter kit, for PrimeLab 2.0
- Cuvettes for Photometer PrimeLab 2.0
- Cuvettes for photometers
- Digestion Reagents for Photometer photoLab® and pHotoFlex®
- Disposable syringes for Photometer PrimeLab 2.0
- Handheld photometers pHotoFlex® series, with / without pH and turbidity measurement
- LLG Photometers PrimeLab 1.0
- ORP electrodes for PrimeLab 2.0
- ORP Electrodes Starter Kit For PrimeLab 2.0
- pH electrodes for PrimeLab 2.0
- pH electrodes for PrimeLab 2.0, refillable
- pH electrodes, starter kit, for PrimeLab 2.0
- pH electrodes, starter kit, for PrimeLab 2.0, refillable
- Photometer NANOCOLOR® VIS II / NANOCOLOR® UV/VIS II
- Photometer photoLab® and pHotoFlex®, stored test programs
- Photometer photoLab® and photoFlex®, stored test protocols
- Photometer PrimeLab 2.0 SOLO
- Photometer PrimeLab 2.0 starter-kit
- Photometer PrimeLab 2.0 starter-kit, all parameters activated
- Photometer PrimeLab 2.0 starter-kit, all parameters activated, except turbidity (NTU)/PTSA/fluorescein
- Photometer PrimeLab 2.0 starter-kit, with turbidity (NTU)
- Photometer system MD 600 / MD 610
- Photometer system MultiDirect
- Photometers AL100
- Photometers AL100 Boiler Water, Cooling Water
- Portable UV254 Analyser
- Reagent powder for Comparators and Photometers Lovibond®
- Reagent sets drops
- Reagent sets powder
- Reagent sets tablets
- Reagent solutions for photometers Aqualytic
- Reagent tablets for Photometer Lovibond®
- Reagent tablets for photometers Aqualytic
- Reagents for Photometer MD 100 Boiler Water/Cooling Water
- Reagents VARIO for Photometer Aqualytic and HACH®
- Reference Standard Kit
- Reference standard kit pH for photometers MD series
- Reference standard kits Chloride for photometers MD series
- Reference standards for Photometer PrimeLab 2.0
- Tube tests NANOCOLOR® Part 1
- Tube tests NANOCOLOR® Part 2
- UV Spectral Sensor
- UV254 Absorption Photometer
- Waste Water Set-Up MD 610
- Special Distillation
- Turbidity
- Sample Preparation
- Sample Transport and Storage
- Texture
- Trace Analysis
- Water Purification
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Photometer PrimeLab 2.0 starter-kit, all parameters activated
The photometer with 18 different wavelengths (3 sensors with 6 wavelengths) covers the full VIS-spectrum as well as key parts of UV and IR spectrum. LEDs are set up at 180° as well as at 90° to enable NTU-Turbidity, PTSA and Fluorescein measurements as well.
- 5.5" colour HD touch-display
- More than 140 different parameter methods
- Please order reagents separately
- Auto-calibration function
- Intelligent OTZ (One-Time-Zero) function
- Can be used with 1 ml, 16 mm and 24 mm cuvettes
- Data management with free software (LabCOM) / app in free cloud including individual accounts and reporting system
Scope of supply:
Multitest Photometer PrimeLab 2.0, carrying case, 10 x 24 mm/10 ml glass cuvettes with lid, light-shield, 16 and 24 mm cuvette adapters, stirring rod, 10 ml plastic syringe, cleaning brush, battery-charger with USB-cable (type C), 20 ml luer lock syringe, filter adapter, 2 cans with 50 filter papers, 100 ml can with lid
| Spectral range: | 390 ... 950 nm, 18 wavelengths |
| Ambient temperature: | 5 ... 45 °C |
| Rel. humidity: | 30 ... 90 % |
| Internal memory: | 150000 measurements |
| Datatransfer: | WiFi, GSM |
| Software: | LabCOM software, LabCOM App, LabCOM Cloud |
| Power supply: | 8500 mA Li-Io battery, 5 V power supply with adapters |
| Warranty: | 2 years |
Photometer PrimeLab 2.0 starter-kit, all parameters activated
PART NO.4AJ-6315756
18730||18652||73285||73390||73401
Description||Dimensions (W x D x H) mm||Weight g||Protection class||PK
PrimeLab 2.0 starter-kit, all parameters activated||100 x 255 x 59||715||IP 54||1
Water-i.d.
PL02BALL
PRIMELAB20
0
6
0
1
Price: €1,399.00
Out of Stock