+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Analytical Systems for Environmental and Food Analysis
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Accessories Data and electronics for Photometer PrimeLab 2.0
- Accessories for AQUALYTIC® photometers
- Accessories for photometer photoFlex® series and turbidimeters Turb® 430 series
- Accessories for Photometer PrimeLab 2.0
- Accessories for Photometers PrimeLab 1.0
- Accessories NANOCOLOR®
- Accessories NANOCOLOR®, membrane filtration
- Accessories NANOCOLOR®, Standard rectangular cuvettes
- Cells for Photometer photoLab®
- Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
- Conductivity cell probes for purified and ultra-pure water, starter kit, for PrimeLab 2.0
- Conductivity cell probes, for PrimeLab 2.0
- Conductivity cell probes, starter kit, for PrimeLab 2.0
- Cuvettes for Photometer PrimeLab 2.0
- Cuvettes for photometers
- Digestion Reagents for Photometer photoLab® and pHotoFlex®
- Disposable syringes for Photometer PrimeLab 2.0
- Handheld photometers pHotoFlex® series, with / without pH and turbidity measurement
- LLG Photometers PrimeLab 1.0
- ORP electrodes for PrimeLab 2.0
- ORP Electrodes Starter Kit For PrimeLab 2.0
- pH electrodes for PrimeLab 2.0
- pH electrodes for PrimeLab 2.0, refillable
- pH electrodes, starter kit, for PrimeLab 2.0
- pH electrodes, starter kit, for PrimeLab 2.0, refillable
- Photometer NANOCOLOR® VIS II / NANOCOLOR® UV/VIS II
- Photometer photoLab® and pHotoFlex®, stored test programs
- Photometer photoLab® and photoFlex®, stored test protocols
- Photometer PrimeLab 2.0 SOLO
- Photometer PrimeLab 2.0 starter-kit
- Photometer PrimeLab 2.0 starter-kit, all parameters activated
- Photometer PrimeLab 2.0 starter-kit, all parameters activated, except turbidity (NTU)/PTSA/fluorescein
- Photometer PrimeLab 2.0 starter-kit, with turbidity (NTU)
- Photometer system MD 600 / MD 610
- Photometer system MultiDirect
- Photometers AL100
- Photometers AL100 Boiler Water, Cooling Water
- Portable UV254 Analyser
- Reagent powder for Comparators and Photometers Lovibond®
- Reagent sets drops
- Reagent sets powder
- Reagent sets tablets
- Reagent solutions for photometers Aqualytic
- Reagent tablets for Photometer Lovibond®
- Reagent tablets for photometers Aqualytic
- Reagents for Photometer MD 100 Boiler Water/Cooling Water
- Reagents VARIO for Photometer Aqualytic and HACH®
- Reference Standard Kit
- Reference standard kit pH for photometers MD series
- Reference standard kits Chloride for photometers MD series
- Reference standards for Photometer PrimeLab 2.0
- Tube tests NANOCOLOR® Part 1
- Tube tests NANOCOLOR® Part 2
- UV Spectral Sensor
- UV254 Absorption Photometer
- Waste Water Set-Up MD 610
- Special Distillation
- Turbidity
- Sample Preparation
- Sample Transport and Storage
- Texture
- Trace Analysis
- Water Purification
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
For conductivity measurements of purified and ultra-pure water.
- Glass electrode
- With integrated temperature sensor
- For connecting to the ProbeBOX 1.0
Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
PART NO.4AJ-4686966
73957||73403||73750||73334||73571||18810||73401
Conductivity||Cell constant||Temp. range °C||Material||Electrode||Temperature sensor||PK
0 ... 200 μS/cm||K = 0,1||0 ... 80||glass||7x18 mm platinum||NTC 30kΩ||1
Water-i.d.
PL2SP-ELECLRGL
0
3
0
1
Price: €478.40
Out of Stock