+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Analytical Systems for Environmental and Food Analysis
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Accessories Data and electronics for Photometer PrimeLab 2.0
- Accessories for AQUALYTIC® photometers
- Accessories for photometer photoFlex® series and turbidimeters Turb® 430 series
- Accessories for Photometer PrimeLab 2.0
- Accessories for Photometers PrimeLab 1.0
- Accessories NANOCOLOR®
- Accessories NANOCOLOR®, membrane filtration
- Accessories NANOCOLOR®, Standard rectangular cuvettes
- Cells for Photometer photoLab®
- Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
- Conductivity cell probes for purified and ultra-pure water, starter kit, for PrimeLab 2.0
- Conductivity cell probes, for PrimeLab 2.0
- Conductivity cell probes, starter kit, for PrimeLab 2.0
- Cuvettes for Photometer PrimeLab 2.0
- Cuvettes for photometers
- Digestion Reagents for Photometer photoLab® and pHotoFlex®
- Disposable syringes for Photometer PrimeLab 2.0
- Handheld photometers pHotoFlex® series, with / without pH and turbidity measurement
- LLG Photometers PrimeLab 1.0
- ORP electrodes for PrimeLab 2.0
- ORP Electrodes Starter Kit For PrimeLab 2.0
- pH electrodes for PrimeLab 2.0
- pH electrodes for PrimeLab 2.0, refillable
- pH electrodes, starter kit, for PrimeLab 2.0
- pH electrodes, starter kit, for PrimeLab 2.0, refillable
- Photometer NANOCOLOR® VIS II / NANOCOLOR® UV/VIS II
- Photometer photoLab® and pHotoFlex®, stored test programs
- Photometer photoLab® and photoFlex®, stored test protocols
- Photometer PrimeLab 2.0 SOLO
- Photometer PrimeLab 2.0 starter-kit
- Photometer PrimeLab 2.0 starter-kit, all parameters activated
- Photometer PrimeLab 2.0 starter-kit, all parameters activated, except turbidity (NTU)/PTSA/fluorescein
- Photometer PrimeLab 2.0 starter-kit, with turbidity (NTU)
- Photometer system MD 600 / MD 610
- Photometer system MultiDirect
- Photometers AL100
- Photometers AL100 Boiler Water, Cooling Water
- Portable UV254 Analyser
- Reagent powder for Comparators and Photometers Lovibond®
- Reagent sets drops
- Reagent sets powder
- Reagent sets tablets
- Reagent solutions for photometers Aqualytic
- Reagent tablets for Photometer Lovibond®
- Reagent tablets for photometers Aqualytic
- Reagents for Photometer MD 100 Boiler Water/Cooling Water
- Reagents VARIO for Photometer Aqualytic and HACH®
- Reference Standard Kit
- Reference standard kit pH for photometers MD series
- Reference standard kits Chloride for photometers MD series
- Reference standards for Photometer PrimeLab 2.0
- Tube tests NANOCOLOR® Part 1
- Tube tests NANOCOLOR® Part 2
- UV Spectral Sensor
- UV254 Absorption Photometer
- Waste Water Set-Up MD 610
- Special Distillation
- Turbidity
- Sample Preparation
- Sample Transport and Storage
- Texture
- Trace Analysis
- Water Purification
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Waste Water Set-Up MD 610
Flexible wastewater measuring station with mobile photometer MD 610 and thermoreactor RD 125, complete with reagents for COD measurement and the appropriate accessories. With the MD 610, the measurement results of the wastewater can be called up and evaluated on a smartphone or tablet. The RD 125 thermoreactor is equipped with 24 holes for 16 mm cuvettes.
- Data transfer via Bluetooth® and AquaLX® app
- Interference filter for increased reproducibility of the results
- Memory for 500 measurement results
- 120 pre-programmed methods
Scope of supply: Photometer MD 610, standard accessories, Thermoreactor RD 125, Cuvette tests: COD (0 ... 150 mg/l, 0 ... 1500 mg/l, ammonium VARIO HR (1 ... 50 mg/l N), nitrate VARIO (1 ... 30 mg/l N), nitrite LR VARIO Powder Pack (0.01 ... 0.3 mg/l N), nitrogen VARIO Total HR (5 ... 150 mg/l N ), phosphate VARIO Total HR (0.02 ... 1 mg/l P / 0.06 ... 3.5 mg/l PO4), cuvette stand, membrane filtration set, operating instructions, warranty declaration
