Your basket is empty
BROWSE OUR PRODUCT CATALOGUE

Product Categories

CO2 Incubators ICO

The new CO2 Incubators with the unique ControlCOCKPIT with TwinDISPLAY. Safety at all times: When it comes to safety and user friendliness, the highly modern CO2 incubator ICO is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO2 control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO2, O2, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilized for 60 minutes at 180 °C (including all sensors).
Standard equipment:

  • Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
  • Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
  • Interior made of stainless steel 1.4301 (ASTM 304), deep-drawn, seamlessly welded,with rounded corner, with perforated stainless steel shelves (size 50: 1 , sies 105 - 240: 2) and 1 stainless steel water dish (all sizes)
  • Large-area multi-functional heating system on four sides with additional door and back heating to avoid condensation
  • Housing made of textured stainless steel, rear zinc-plated steel
  • Fully insulated stainless steel door and heated inner glass door
  • Operation and setting of all parameters via ControlCOCKPIT
  • High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standards
  • Internal data logger with a storage capacity of at least 10 years
  • German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
  • Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
  • The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber
  • Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT
  • Works calibration certificate (measuring point chamber centre) at +37 °C, 5 % CO2 for standard units
  • Works calibration certificate at 37 °C, 5 % CO2 and 90 % rh (requires option K7), standard equipment for units with active humidity control
  • Works calibration certificate at 37 °C, 5 % CO2, 90 % rh and 10 % O2 (requires option K7 and option T6); standard equipment for units with O2 control

Accessories on request.

CO2 Incubators ICO
Specifications
Working temperature range:at least 5 above ambient up to +50°C
(standard sterilisation programme: 60 minutes at 180°C)
Setting temperature range:+18 °C up to +50 °C
Setting accuracy temperature:0,1°C
Humidity limitation thanks to a Peltier element:when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/-2,5 %
Setting range active humidity control:40 to 97 % rh and rh-Off
Setting accuracy humidity:0,5 % rh
CO2-concentration:0 to 20 %
O2-concentration:1 to 20 %
Setting accuracy CO2:0,1 %
Setting accuracy O2:0,1 %
Power supply:230 V, 50/60 Hz

CO2 Incubators ICO



Memmert CO²-Incubator ICO150med ICO150MED
PART NO.4AJ-6283120
Memmert
ICO150MED
ICO150MED

Incubators CO2

0
17
2
1
Out of Stock
Memmert CO²-Incubator ICO105med ICO105MED
PART NO.4AJ-6283119
Memmert
ICO105MED
ICO105MED

Incubators CO2

0
6
1
1
Out of Stock
Memmert CO²-Incubator ICO50med ICO50MED
PART NO.4AJ-6283118
Memmert
ICO50MED
ICO50MED

Incubators CO2

0
8
0
1
Out of Stock
Memmert CO²-Incubator ICO240med ICO240MED
PART NO.4AJ-6283121
Memmert
ICO240MED
ICO240MED

Incubators CO2

0
13
3
1
Out of Stock

Copyright 2013 Lab Unlimited Sitemap | Terms & Conditions | ! Product images are for illustrative purposes only !