+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Access port with silicone plug for CO2 incubators CB series
- Accessories for CO2 Incubators ICOmed
- Accessories for CO2 Incubators INCOmed
- Accessories for CO2 inkubatoren Heracell™ VIOS
- Accessories for Midi 40 CO2Incubator
- Base frames for CO2 incubators CB series
- Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
- Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
- CO2 incubator ICO
- CO2 Incubator Midi 40 with small volume
- CO2 incubator, BBD 6220
- CO2 incubator, BBD 6220
- CO2 incubators CB
- CO2 incubators CB-O, with O2 control
- CO2 incubators CB-S Solid.Line
- CO2 incubators CBF-O, with humidity and O2 control
- CO2 incubators CBF-OZ, with cell therapy compartmentalization, humidity and O2 control
- CO2 incubators CBF, with humidity control
- CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter, with O2 control
- CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with stainless steel interior/air jacket, without ULPA filter
- CO2 incubators Heracell™ VIOS 160i, dual chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, dual chamber, TC-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor
- CO2 Incubators ICOmed
- CO2 Incubators with Chambers Heracell™ 150i/240i
- Copper interior for CO2 incubator CB-S 170
- Divided inner doors for CO2 incubators CB / CBF
- Door hinge on the left for CO2 incubators CB series
- Options for CO2 incubator Heracell™ VIOS
- Quick sample access for CO2 incubators CB / CBF
- Shelves for CO2 incubators CB
- Shelves for CO2 incubators CB with divided inner door
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- CO2-Incubator
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
CO2 Incubators ICOmed
The CO2 incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO2 control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO2, O2, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilised for 60 minutes at 180 °C (including all sensors). The active humidity control offers optimal protection for cell and tissue cultures. It minimizes evaporation in the interior and ensures short recovery times. Every Memmert CO2 incubator ICOmed is a medical device of class IIa according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).
- fully insulated stainless steel door and heated inner glass door
Model variant TwinDISPLAY: ControlCOCKPIT with two colour displays
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
CO2 Incubators ICOmed
PART NO.4AJ-6283120
81588||81681||79055||79442||81314||79334||79372||81862||79795||79085||78965||79370||79246||79162||81339||81351||81974||79791||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. delivery pressure bar||Capacity g||Flame temperature °C||Max. CO2 %||Length pipeclay tubes mm||Width heating area mm||With timer||Max. no. of inserts||Ext. height mm||Temperature stability °C||Int. width mm||Height int. mm||Stem Ø mm||Weight kg||Depth int.||PK
+5||50||RT+5 ... 50 °C||±0,1|| ||20.0||1.0||20||93|| ||10||719||591||1070||560||700||90|| ||1
Memmert
ICO150MED
ICO150MED
Incubators CO2
0
5
2
1
Out of Stock
PART NO.4AJ-6283119
81588||81681||79055||79442||81314||79334||79372||81862||79795||79085||78965||79370||79246||79162||81339||81351||81974||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. delivery pressure bar||Capacity g||Flame temperature °C||Max. CO2 %||Length pipeclay tubes mm||Width heating area mm||With timer||Max. no. of inserts||Ext. height mm||Temperature stability °C||Int. width mm||Height int. mm||Stem Ø mm||Weight kg||PK
+5||50||RT+5 ... 50 °C||±0,1|| ||20.0||1.0||20||93|| ||6||719||591||850||560||480||75||1
Memmert
ICO105MED
ICO105MED
Incubators CO2
0
5
1
1
Out of Stock
PART NO.4AJ-6283118
81588||81681||79055||79442||81314||79334||79372||81862||79795||79085||78965||79370||79246||79162||81339||81351||81974||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. delivery pressure bar||Capacity g||Flame temperature °C||Max. CO2 %||Length pipeclay tubes mm||Width heating area mm||With timer||Max. no. of inserts||Ext. height mm||Temperature stability °C||Int. width mm||Height int. mm||Stem Ø mm||Weight kg||PK
+5||50||RT+5 ... 50 °C||±0,1|| ||20.0||1.0||20||93|| ||5||559||521||795||400||425||55||1
Memmert
ICO50MED
ICO50MED
Incubators CO2
0
5
0
1
Out of Stock
PART NO.4AJ-6283121
81588||81681||79055||79442||81314||79334||79372||81862||79795||79085||78965||79370||79246||79162||81339||81351||81974||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. delivery pressure bar||Capacity g||Flame temperature °C||Max. CO2 %||Length pipeclay tubes mm||Width heating area mm||With timer||Max. no. of inserts||Ext. height mm||Temperature stability °C||Int. width mm||Height int. mm||Stem Ø mm||Weight kg||PK
+5||50||RT+5 ... 50 °C||±0,1|| ||20.0||1.0||20||93|| ||12||759||691||1180||600||810||110||1
Memmert
ICO240MED
ICO240MED
Incubators CO2
0
5
3
1
Out of Stock