+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Access port with silicone plug for CO2 incubators CB series
- Accessories for CO2 Incubators ICOmed
- Accessories for CO2 Incubators INCOmed
- Accessories for CO2 inkubatoren Heracell™ VIOS
- Accessories for Midi 40 CO2Incubator
- Base frames for CO2 incubators CB series
- Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
- Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
- CO2 incubator ICO
- CO2 Incubator Midi 40 with small volume
- CO2 incubator, BBD 6220
- CO2 incubator, BBD 6220
- CO2 incubators CB
- CO2 incubators CB-O, with O2 control
- CO2 incubators CB-S Solid.Line
- CO2 incubators CBF-O, with humidity and O2 control
- CO2 incubators CBF-OZ, with cell therapy compartmentalization, humidity and O2 control
- CO2 incubators CBF, with humidity control
- CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter, with O2 control
- CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with stainless steel interior/air jacket, without ULPA filter
- CO2 incubators Heracell™ VIOS 160i, dual chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, dual chamber, TC-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor
- CO2 Incubators ICOmed
- CO2 Incubators with Chambers Heracell™ 150i/240i
- Copper interior for CO2 incubator CB-S 170
- Divided inner doors for CO2 incubators CB / CBF
- Door hinge on the left for CO2 incubators CB series
- Options for CO2 incubator Heracell™ VIOS
- Quick sample access for CO2 incubators CB / CBF
- Shelves for CO2 incubators CB
- Shelves for CO2 incubators CB with divided inner door
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- CO2-Incubator
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
CO2 incubators CBF, with humidity control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.
- Anti-contamination concept with 180 °C hot air sterilization
- CO2 sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel
- Fanless interior with Venturi CO2 gas mixing nozzle
- Internal data logger, measured values can be read out via USB
- Troubleshooting system with visual and acoustic alarms
- Interfaces: Ethernet, USB, zero-voltage alarm contact
-Contamination-safe humidification system without water pan
- Touchscreen controller
- Fail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CBF, with humidity control
PART NO.4AJ-4705100
81588||81681||79055||81190||81314||79334||79561||81869||81648||79776||79795||82226||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Capacity g||Flame temperature °C||Resolution||Volume bath||With bag||Depth heating area mm||Width heating area mm||Material protective cap||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
+6||60||RT+6 ... 60 °C||±0,1 K (37 °C)|| ||20.0||0 ... 20 %|| || ||50||95||50 ... 95 %|| ||6|| ||680||715||870||680 x 715 x 870 mm||560||600||560 x 500 x 600 mm||95||US||Mains connection|| || ||1
BINDER
9640-0019
CBF170UL
Incubator(s) CO2
0
0
1
1
Out of Stock
PART NO.4AJ-4684692
81588||81681||79055||81190||81314||79334||81869||81648||79776||79795||82226||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Capacity g||Flame temperature °C||Volume bath||With bag||Depth heating area mm||Width heating area mm||Material protective cap||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
+6||60||RT+6 ... 60 °C||±0,1 K (37 °C)|| ||20.0|| || ||50||95||50 ... 95 %|| ||6|| ||680||715||870||680 x 715 x 870 mm||560||600||560 x 500 x 600 mm||95||EU||Mains connection|| || ||1
BINDER
9640-0017
CBF170
Incubator(s) CO2
0
0
0
1
Out of Stock
PART NO.4AJ-4684689
81588||81681||79055||81190||81314||79334||79561||81869||81648||79776||79795||82226||79085||78965||79998||79370||79246||79162||81201||81339||81351||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Capacity g||Flame temperature °C||Resolution||Volume bath||With bag||Depth heating area mm||Width heating area mm||Material protective cap||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
+6||60||RT+6 ... 60 °C||±0,1 K (37 °C)|| ||20.0||0 ... 20 %|| || ||50||95||50 ... 95 %|| ||8|| ||740||785||1020||740 x 785 x 1,020 mm||620||750||126||EU||Mains connection|| || ||1
BINDER
9640-0021
CBF260
Incubator(s) CO2
0
0
2
1
Out of Stock
PART NO.4AJ-4705102
81588||81681||79055||81190||81314||79334||79561||81869||81648||79776||79795||82226||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Capacity g||Flame temperature °C||Resolution||Volume bath||With bag||Depth heating area mm||Width heating area mm||Material protective cap||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
+6||60||RT+6 ... 60 °C||±0,1 K (37 °C)|| ||20.0||0 ... 20 %|| || ||50||95||50 ... 95 %|| ||8|| ||740||785||1020||740 x 785 x 1,020 mm||620||750||620 x 575 x 750 mm||126||US||Mains connection|| || ||1
BINDER
9640-0023
CBF260UL
Incubator(s) CO2
0
0
3
1
Out of Stock
Accessories:
- Shelves for CO2 incubators CB
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Base frames for CO2 incubators CB series
- Divided inner doors for CO2 incubators CB / CBF
- Quick sample access for CO2 incubators CB / CBF
- Door hinge on the left for CO2 incubators CB series
- Access port with silicone plug for CO2 incubators CB series
- Shelves for CO2 incubators CB with divided inner door