+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Accessoires for Muffle furnaces, M110-series
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing/Burn off furnaces LV 3/11 - LVT 15/11
- Chamber furnaces
- Charging rack for ashing furnaces
- Collecting Pans for Muffle and Ashing Furnaces
- Double spatulas, nylon
- Exhaust Systems for Muffle Furnaces
- High-temperature chamber furnaces with air circulation NA / NAT
- High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT 03/14 - 08/16 series
- High-temperature Tube Furnaces RHTH/RHTV series
- Muffle furnaces series L, max. 1100 °C, with flap door
- Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1
- Muffle furnaces series L, max. 1200 °C, with flap door
- Muffle furnaces series L, max. 1400 °C, with flap door
- Muffle Furnaces Series LE 1/11 - LE 24/11 up to 1100 °C
- Muffle furnaces series LT, max. 1100 °C, with lift door
- Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation
- Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control
- Muffle furnaces series LT, max. 1200 °C, with lift door
- Muffle furnaces series LT, max. 1400 °C, with lift door
- Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces Thermolyne™
- Rapid incinerator
- Ribbed plates for muffle and ashing furnaces, ceramic
- Tube Furnaces
- Tube Furnaces with Stand
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Chamber furnaces
The chamber furnaces are suitable for Annealing, Hardening and Brazing. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quench tank. Even high-performance applications like the annealing of titanium can be implemented without the use of expensive and complicated annealing systems.
- Robust insulation with light refractory bricks
- Deep furnace chamber with three-sides heating: from both side walls and bottom
- Low energy consumption due to multi-layer insulation
- Base frame included
- N 7/H - N 17/HR designed as table-top model
- Parallel guided downward swinging door (user protected from heat radiation)
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
- Equipped with the B 500 programmable controller (with touch panel, 5 programmes with 4 segments each), optionally available with the C 540 controller
Chamber furnaces
PART NO.4AJ-6241122
79556||79101||79279||79207||79986||79162||81746||81339||79181||81597||81112||79370||81201||81974||81606||81311||78960||79404||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Int. width mm||For tubes ml||Height int. mm||Min. funnel Ø||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||mV range accuracy||Weight kg||Min. temp. sensor||Material stopcock||Min. filter Ø||IP code||PK
N 41/H/B500||40||1280||Parallel swinging door||Downwards||350||500||250||350 x 500 x 250 mm||1040||1250||1340||1,040 x 1,250 x 1,340 mm||260|| || || || ||1
Nabertherm
N05H1NKNE
455-0117
Chamber furnaces
0
4
4
1
Out of Stock
PART NO.4AJ-6227200
79556||79101||79279||79207||79986||79162||81746||81339||79181||81597||81112||79370||81201||81974||81606||81311||78960||79404||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Int. width mm||For tubes ml||Height int. mm||Min. funnel Ø||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||mV range accuracy||Weight kg||Min. temp. sensor||Material stopcock||Min. filter Ø||IP code||PK
N 11/H/B500||11||1280||Parallel swinging door||Downwards||250||350||140||250 x 350 x 140 mm||800||750||600||800 x 750 x 600 mm||70|| || || || ||1
Nabertherm
N02H1NKNA
455-0107
Chamber furnaces
0
3
1
1
Out of Stock
PART NO.4AJ-6226571
79556||79101||79279||79207||79986||79162||81746||81339||79181||81597||81112||79370||81201||81974||81606||81311||78960||79404||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Int. width mm||For tubes ml||Height int. mm||Min. funnel Ø||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||mV range accuracy||Weight kg||Min. temp. sensor||Material stopcock||Min. filter Ø||IP code||PK
N 7/H/B500||9||1280||Parallel swinging door||Downwards||250||250||140||250 x 250 x 140 mm||800||650||600||800 x 650 x 600 mm||60|| || || || ||1
Nabertherm
N01H1NKNA
455-0105
Chamber furnaces
0
6
0
1
Out of Stock
PART NO.4AJ-6226570
79556||79101||79279||79207||79986||79162||81746||81339||79181||81597||81112||79370||81201||81974||81606||81311||78960||79404||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Int. width mm||For tubes ml||Height int. mm||Min. funnel Ø||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||mV range accuracy||Weight kg||Min. temp. sensor||Material stopcock||Min. filter Ø||IP code||PK
N 11/HR/B500||11||1280||Parallel swinging door||Downwards||250||350||140||250 x 350 x 140 mm||800||750||600||800 x 750 x 600 mm||70|| || || || ||1
Nabertherm
N02R1NKNE
455-0109
Chamber furnaces
0
4
2
1
Out of Stock
PART NO.4AJ-4675221
79556||79101||79279||79207||79986||79162||81746||81339||79181||81597||81112||79370||81201||81974||81606||81311||78960||79404||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Int. width mm||For tubes ml||Height int. mm||Min. funnel Ø||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||mV range accuracy||Weight kg||Min. temp. sensor||Material stopcock||Min. filter Ø||IP code||PK
N 87/H/B500||87||1280||Parallel swinging door||Downwards||350||1000||250||350 x 1,000 x 250 mm||1040||1750||1340||1,040 x 1,750 x 1,340 mm||480|| || || || ||1
N07H1NKNE
Chamber furnaces
0
4
6
1
Out of Stock
PART NO.4AJ-4675220
79556||79101||79279||79207||79986||79162||81746||81339||79181||81597||81112||79370||81201||81974||81606||81311||78960||79404||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Int. width mm||For tubes ml||Height int. mm||Min. funnel Ø||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||mV range accuracy||Weight kg||Min. temp. sensor||Material stopcock||Min. filter Ø||IP code||PK
N 31/H/B500||30||1280||Parallel swinging door||Downwards||350||350||250||350 x 350 x 250 mm||1040||1100||1340||1,040 x 1,100 x 1,340 mm||210|| || || || ||1
N04H1NKNE
Chamber furnaces
0
4
3
1
Out of Stock
PART NO.4AJ-6285618
79556||79101||79279||79207||79986||79162||81746||81339||79181||81597||81112||79370||81201||81974||81606||81311||78960||79404||81657
Power supply||Nominal capacity l||Depth stage mm||Flash point||Min. int. temperature||Int. width mm||For tubes ml||Height int. mm||Min. funnel Ø||Ext. width mm||Min. permitted ambient temperature °C||Ext. height mm||mV range accuracy||Weight kg||Min. temp. sensor||Material stopcock||Min. filter Ø||IP code||PK
N 61/H/B500||60||1280||Parallel swinging door||Downwards||350||750||250||350 x 750 x 250 mm||1040||1500||1340||1,040 x 1,500 x 1,340 mm||400|| || || || ||1
Nabertherm
N06H1NKNE
N61HB400
Chamber furnaces
0
4
5
1
Out of Stock