+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Accessoires for Muffle furnaces, M110-series
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing/Burn off furnaces LV 3/11 - LVT 15/11
- Chamber furnaces
- Charging rack for ashing furnaces
- Collecting Pans for Muffle and Ashing Furnaces
- Double spatulas, nylon
- Exhaust Systems for Muffle Furnaces
- High-temperature chamber furnaces with air circulation NA / NAT
- High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT 03/14 - 08/16 series
- High-temperature Tube Furnaces RHTH/RHTV series
- Muffle furnaces series L, max. 1100 °C, with flap door
- Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1
- Muffle furnaces series L, max. 1200 °C, with flap door
- Muffle furnaces series L, max. 1400 °C, with flap door
- Muffle Furnaces Series LE 1/11 - LE 24/11 up to 1100 °C
- Muffle furnaces series LT, max. 1100 °C, with lift door
- Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation
- Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control
- Muffle furnaces series LT, max. 1200 °C, with lift door
- Muffle furnaces series LT, max. 1400 °C, with lift door
- Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces Thermolyne™
- Rapid incinerator
- Ribbed plates for muffle and ashing furnaces, ceramic
- Tube Furnaces
- Tube Furnaces with Stand
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.
- Side, top or down-opening door depending on model
- Outer casing made of powder-coated sheet metal
- Exhaust chimney with fan
- Control panel in the lower part of the oven
- Incl. door safety switch
- Fast heating time
- Good stability and temperature distribution
- Low power consumption
-With temperature controller Omron E5CC-T: programmable PID controller with 8 programmes and 32 programming segments
Alternatives
Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controllerAshing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
PART NO.4AJ-4669230
81681||82166||81278||81974||79181||81201||81337||81361||79556||79520||81311||81339||81351||79370||79246||79162||81657
Min. temperature °C||Max. inlet pressure||Arrangement compartments||Weight kg||Min. funnel Ø||mV range accuracy||Ø mm||Tubing Ø||Power supply||Temperature sensor||Material stopcock||Height int. mm||Stem Ø mm||Ext. height mm||Temperature stability °C||Int. width mm||PK
1100|| ||Upwards||28||195 x 310 x 135 mm||445 x 710 x 495 mm||1800||EU||Mains connection|| || ||195||135||445||710||495||1
Umega Group, AB
ALHM012F021285
SNOL
Ashing furnace(s)
Furnace(s) ashing
Laboratory furnace(s) ashing
0
0
0
1
Out of Stock
PART NO.4AJ-4686531
81681||82166||81278||81974||79181||81201||81337||81361||79556||79520||81311||81339||81351||79370||79246||79162||81657
Min. temperature °C||Max. inlet pressure||Arrangement compartments||Weight kg||Min. funnel Ø||mV range accuracy||Ø mm||Tubing Ø||Power supply||Temperature sensor||Material stopcock||Height int. mm||Stem Ø mm||Ext. height mm||Temperature stability °C||Int. width mm||PK
1100|| ||Upwards||28||195 x 310 x 135 mm||445 x 710 x 495 mm||1800||UK||Mains connection|| || ||195||135||445||710||495||1
Umega Group, AB
ALHM012F02F285
Ashing furnace(s)
Furnace(s) ashing
Laboratory furnace(s) ashing
0
0
1
1
Out of Stock
PART NO.4AJ-4686532
81681||82166||81278||81974||79181||81201||81337||81361||79556||79520||81311||81339||81351||79370||79246||79162||81657
Min. temperature °C||Max. inlet pressure||Arrangement compartments||Weight kg||Min. funnel Ø||mV range accuracy||Ø mm||Tubing Ø||Power supply||Temperature sensor||Material stopcock||Height int. mm||Stem Ø mm||Ext. height mm||Temperature stability °C||Int. width mm||PK
1100|| ||To the left||28||195 x 310 x 135 mm||440 x 580 x 495 mm||1800||UK||Mains connection|| || ||195||135||440||580||495||1
Umega Group, AB
ALSM012F02F018
Ashing furnace(s)
Furnace(s) ashing
Laboratory furnace(s) ashing
0
0
3
1
Out of Stock
PART NO.4AJ-4669232
81681||82166||81278||81974||79181||81201||81337||81361||79556||79520||81311||81339||81351||79370||79246||79162||81657
Min. temperature °C||Max. inlet pressure||Arrangement compartments||Weight kg||Min. funnel Ø||mV range accuracy||Ø mm||Tubing Ø||Power supply||Temperature sensor||Material stopcock||Height int. mm||Stem Ø mm||Ext. height mm||Temperature stability °C||Int. width mm||PK
1100|| ||Downwards||28||195 x 310 x 135 mm||440 x 580 x 495 mm||1800||EU||Mains connection|| || ||195||135||440||580||495||1
Umega Group, AB
ALZM012F021132
SNOL
Ashing furnace(s)
Furnace(s) ashing
Laboratory furnace(s) ashing
0
0
4
1
Out of Stock
PART NO.4AJ-4669231
81681||81278||81974||79181||81201||81337||81361||81311||81339||81351||79370||79246||79162||81657
Min. temperature °C||Arrangement compartments||Weight kg||Min. funnel Ø||mV range accuracy||Ø mm||Tubing Ø||Material stopcock||Height int. mm||Stem Ø mm||Ext. height mm||Temperature stability °C||Int. width mm||PK
1100||To the left||28||195 x 310 x 135 mm||440 x 580 x 495 mm||1800||EU|| ||195||135||440||580||495||1
Umega Group, AB
ALSM012F020018
SNOL
Ashing furnace(s)
Furnace(s) ashing
Laboratory furnace(s) ashing
0
8
2
1
Out of Stock
PART NO.4AJ-4686533
81681||82166||81278||81974||79181||81201||81337||81361||79556||79520||81311||81339||81351||79370||79246||79162||81657
Min. temperature °C||Max. inlet pressure||Arrangement compartments||Weight kg||Min. funnel Ø||mV range accuracy||Ø mm||Tubing Ø||Power supply||Temperature sensor||Material stopcock||Height int. mm||Stem Ø mm||Ext. height mm||Temperature stability °C||Int. width mm||PK
1100|| ||Downwards||28||195 x 310 x 135 mm||440 x 580 x 495 mm||1800||UK||Mains connection|| || ||195||135||440||580||495||1
Umega Group, AB
ALZM012F02F132
Ashing furnace(s)
Furnace(s) ashing
Laboratory furnace(s) ashing
0
0
5
1
Out of Stock