+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Access ports for constant climate chambers KBF PRO
- Accessories Humidity Chamber HCP
- Climate Chambers ICH
- Climate Chambers ICH L, with humidity control and light
- Climatic Test Chamber CTC256
- Climatic Test Chamber CTC256/Temperature Test chamber TTC256
- Constant climate chamber KBF PRO
- Constant climate chamber KBF, white
- Constant Climate Chambers HPPeco
- Constant climate chambers series KBF-S ECO Solid.Line
- Dynamic climate chambers MK
- Dynamic climate chambers MKF, with humidity control
- Dynamic climate chambers MKFT, with humidity control and extended low temperature range
- External water supply
- Feed-throughs for constant climate chambers KBF-S
- Heating element for Rapid incinerator
- Humidity Chambers HCP
- ICH light modules for cooling incubators KB PRO and constant climate chambers KBF/KBF PRO
- Interior lighting for constant climate chambers KBF PRO
- LED light bars Basic set
- LED light bars Expansion set
- Light module for plants
- Material test chamber FP series
- Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller
- Options and Accessories Climatic Test Chamber CTC / TTC (see next page)
- Options and accessories for constant climate chamber HPP
- Perforated stainless steel shelf
- Reinforced racks for BINDER chambers and incubators, stainless steel
- Shaking water baths Hydro
- Shelves for cooling incubators KB/KB PRO and constant climate chambers KBF/KBF PRO
- Stainless steel grid
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Constant climate chamber KBF PRO
The constant climate chambers of the KBF PRO series are equipped with APT.line™ preheating chamber technology and a wide temperature and humidity range, making them suitable for all types of material testing. The humidity range is controlled by means of a capacitive humidity sensor and responsive steam humidification. The constant climate chambers are equipped with proven compressor technology to ensure reliable and failsafe long-term operation. Thanks to the modern inverter cooling unit and the climate-neutral refrigerant R-290, energy-efficient and environmentally friendly cooling is guaranteed. The inner chamber and the two racks with telescopic rails are made of stainless steel, while the inner doors are made of metal oxide-coated safety glass.
- Adjustable fan speed
- Door heating to prevent condensation
- Intuitive touchscreen controller with time-segment and real-time programming
- Ergonomically adjustable control terminal (for models from 470 l volume)
- Signal triangle with light-up status display (for models with a volume of 470 l or more)
- Internal data logger, measured values can be read out in open format via USB interface
- Ethernet interface
- BINDER Multi Management Software APT-COM™ Basic Edition
- Device self-test for comprehensive status analysis
- Class 3.3 independent temperature safety device (DIN 12880) with visual and acoustic alarm
- Table-top device KBF PRO 130 is stackable
- Floor-standing devices with robust twin casters with brakes at the front
Models 260, 470 and 720 can be optionally equipped with light modules for ICH photostability tests. With optional LED light modules, the KBF PRO models from 260 upwards become a plant growth cabinet. Please order light modules separately.
Constant climate chamber KBF PRO
PART NO.4AJ-6523272
81588||81681||79055||81190||79776||79795||82226||79057||79934||79455||79561||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Depth heating area mm||Width heating area mm||Material protective cap||Immersion tube Ø||Body Ø||For tips||Resolution||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
-20||100||-20 ... 100 °C||±0,1 K (25 °C)||10||98||10 ... 98 %||No|| || || || ||16||Stainless steel||1285||1175||1951||1,285 x 1,175 x 1,951 mm||1011||1250||1,011 x 847 x 1,250 mm||360||EU||Mains connection|| || ||1
BINDER
9020-0443
KBFPRO1060
Chambers constant climate
Climate chambers
0
0
4
1
Out of Stock
PART NO.4AJ-6523266
81588||81681||79055||81190||79776||79795||79057||79934||79455||79561||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Depth heating area mm||Width heating area mm||Immersion tube Ø||Body Ø||For tips||Resolution||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
-20||100||-20 ... 100 °C||±0,1 K (25 °C)||10||98||No|| || || || ||16||Stainless steel||1795||1175||1951||1,795 x 1,175 x 1,951 mm||1521||1250||1,521 x 847 x 1,250 mm||450||EU||Mains connection|| || ||1
BINDER
9020-0444
KBFPRO1600
Chambers constant climate
Climate chambers
0
0
5
1
Out of Stock
PART NO.4AJ-4710128
81588||81681||79055||81190||79776||79795||82226||79057||79934||79455||79561||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Depth heating area mm||Width heating area mm||Material protective cap||Immersion tube Ø||Body Ø||For tips||Resolution||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
-20||100||-20 ... 100 °C||±0,1 K (25 °C)||10||98||10 ... 98 %||No|| || || || ||6||Stainless steel||900||710||1005||900 x 710 x 1,005 mm||656||500||656 x 386 x 500 mm||142||EU||Mains connection|| || ||1
BINDER
9020-0439
KBFPRO130
Chambers constant climate
Climate chambers
0
0
0
1
Out of Stock
PART NO.4AJ-4710124
81588||81681||79055||81190||79776||79795||82226||79057||79934||79455||79561||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Depth heating area mm||Width heating area mm||Material protective cap||Immersion tube Ø||Body Ø||For tips||Resolution||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
-20||100||-20 ... 100 °C||±0,1 K (25 °C)||10||98||10 ... 98 %||No|| || || || ||16||Stainless steel||1285||900||1951||1,285 x 900 x 1,951 mm||1011||1250||1,011 x 575 x 1,250 mm||312||EU||Mains connection|| || ||1
BINDER
9020-0442
KBFPRO720
Chambers constant climate
Climate chambers
0
0
3
1
Out of Stock
PART NO.4AJ-4710123
81588||81681||79055||81190||79776||79795||82226||79057||79934||79455||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Depth heating area mm||Width heating area mm||Material protective cap||Immersion tube Ø||Body Ø||For tips||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
-20||100||-20 ... 100 °C||±0,1 K (25 °C)||10||98||10 ... 98 %||No|| || || ||9||Stainless steel||930||900||1396||930 x 900 x 1,396 mm||656||695||656 x 575 x 695 mm||197||EU||Mains connection|| || ||1
BINDER
9020-0440
KBFPRO260
Chambers constant climate
Climate chambers
0
0
1
1
Out of Stock
PART NO.4AJ-6523276
81588||81681||79055||81190||79776||79795||82226||79057||79934||79455||79561||79085||78965||79998||79370||79246||79162||81201||81339||81351||79181||81974||81361||79556||79520||81311||81657
Max. voltage V||Min. temperature °C||No. of s tirring blades||Max. cooling rate||Depth heating area mm||Width heating area mm||Material protective cap||Immersion tube Ø||Body Ø||For tips||Resolution||With timer||Max. no. of inserts||Filling capacity||Ext. height mm||Temperature stability °C||Int. width mm||mV range accuracy||Height int. mm||Stem Ø mm||Min. funnel Ø||Weight kg||Tubing Ø||Power supply||Temperature sensor||Material stopcock||PK
-20||100||-20 ... 100 °C||±0,1 K (25 °C)||10||98||10 ... 98 %||No|| || || || ||16||Stainless steel||930||900||1951||930 x 900 x 1,951 mm||656||1250||656 x 575 x 1,250 mm||249||EU||Mains connection|| || ||1
BINDER
9020-0441
KBFPRO470
Chambers constant climate
Climate chambers
0
0
2
1
Out of Stock
Accessories:
- Shelves for cooling incubators KB/KB PRO and constant climate chambers KBF/KBF PRO
- External water supply
- LED light bars Basic set
- LED light bars Expansion set
- Light module for plants
- Access ports for constant climate chambers KBF PRO
- Interior lighting for constant climate chambers KBF PRO
- ICH light modules for cooling incubators KB PRO and constant climate chambers KBF/KBF PRO