+353 (0)1 4523432
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Access ports for constant climate chambers KBF PRO
- Climate Chambers ICH C, with humidity and CO2 control
- Climate Chambers ICH L, with humidity control and light
- Climate Chambers ICH, with humidity control
- Constant climate chamber KBF PRO
- Constant climate chamber KBF, white
- Constant Climate Chambers HPPeco
- Constant climate chambers KBF-S ECO
- Dynamic climate chambers MK
- Dynamic climate chambers MKF, with humidity control
- Dynamic climate chambers MKFT, with humidity control and extended low temperature range
- Environmental chambers, stainless steel, with humidity control and light option
- External water supply
- Feed-throughs for constant climate chambers KBF-S
- Heating element for Rapid incinerator
- Humidity Chambers HCP
- ICH light modules for cooling incubators KB PRO and constant climate chambers KBF/KBF PRO
- Interior lighting for constant climate chambers KBF PRO
- LED light bars Basic set
- LED light bars Expansion set
- Light module for plants
- Material test chamber FP series
- Options and accessories for constant climate chamber HPP
- Rapid incinerator
- Reinforced racks for BINDER chambers and incubators, stainless steel
- Shelves for cooling incubators KB/KB PRO and constant climate chambers KBF/KBF PRO
- Stainless steel grid
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- PPE
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Material test chamber FP series
The material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.
- High temperature accuracy due to APT.line™ technology
- Adjustable fan speed
- Controller with interval and real-time programming
- User-friendly controller with large display
- Electromechanical control of the exhaust air flap
- Class 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controller
- Models up to 115 l stackable
- Ergonomic handle design
- Computer interface: Ethernet
- Internal data logger, measured values can be read out in open format via USB
Material test chamber FP series
PART NO.4AJ-9883719
81119||79101||81588||82770||81795||82687||79085||78965||81136||82340||82959||82954||82885||79917||82993||83021||82804||82574||81974||81449||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Max. voltage V||Length arm mm||No. of plates||Writeable||With timer||Max. no. of inserts||Media||Exchange capacity||Ext. width mm||Min. measured value mbar||Ext. height mm||Min. adjustable height||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Depth gel||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
FP 720UL||741||+12||300||±0,6 K (150 °C)|| || ||16|| || ||1160||816||1590||1,160 x 816 x 1,590 mm||1000||574||1300||1,000 x 574 x 1,300 mm||166||4500|| ||Mains connection||208 V·3/N/PE, 60 Hz|| || ||1
BINDER
9010-0370
FP720UL
391-0171
Material test chamber
0
0
7
1
Out of Stock
PART NO.4AJ-9883717
81119||79101||81588||82770||81795||82687||79085||78965||81136||82340||82959||82954||82885||79917||82993||83021||82804||82574||81974||81449||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Max. voltage V||Length arm mm||No. of plates||Writeable||With timer||Max. no. of inserts||Media||Exchange capacity||Ext. width mm||Min. measured value mbar||Ext. height mm||Min. adjustable height||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Depth gel||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
FP 260UL||259||+10||300||±0,4 K (150 °C)|| || ||8|| || ||810||786||962||810 x 786 x 962 mm||650||512||780||650 x 512 x 780 mm||82||2500|| ||Mains connection||240 V, 60 Hz|| || ||1
Binder
9010-0369
Material test chamber
0
0
6
1
Out of Stock
PART NO.4AJ-9883716
81119||79101||81588||82770||81795||82687||79085||78965||81136||82340||82959||82954||82885||79917||82993||83021||82804||82574||81974||81449||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Max. voltage V||Length arm mm||No. of plates||Writeable||With timer||Max. no. of inserts||Media||Exchange capacity||Ext. width mm||Min. measured value mbar||Ext. height mm||Min. adjustable height||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Depth gel||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
FP 115UL||116||+10||300||±0,3 K (150 °C)|| || ||5|| || ||714||636||732||714 x 636 x 732 mm||550||383||550||550 x 383 x 550 mm||55||1400|| ||Mains connection||120 V, 60 Hz|| || ||1
BINDER
9010-0368
FP115UL
391-0171
Material test chamber
0
0
5
1
Out of Stock
PART NO.4AJ-9883715
81119||79101||81588||82770||81795||82687||79085||78965||81136||82340||82959||82954||82885||79917||82993||83021||82804||82574||81974||81449||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Max. voltage V||Length arm mm||No. of plates||Writeable||With timer||Max. no. of inserts||Media||Exchange capacity||Ext. width mm||Min. measured value mbar||Ext. height mm||Min. adjustable height||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Depth gel||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
FP 56UL||60||+10||300||±0,4 K (150 °C)|| || ||4|| || ||560||596||622||560 x 596 x 622 mm||400||342||440||400 x 342 x 440 mm||41||1200|| ||Mains connection||120 V, 60 Hz|| || ||1
BINDER
9010-0367
FP53UL
RHEO9010-017
Material test chamber
0
0
4
1
Out of Stock
PART NO.4AJ-9883711
81119||79101||81588||82770||81795||82687||79085||78965||81136||82340||82959||82954||82885||79917||82993||83021||82804||82574||81974||81449||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Max. voltage V||Length arm mm||No. of plates||Writeable||With timer||Max. no. of inserts||Media||Exchange capacity||Ext. width mm||Min. measured value mbar||Ext. height mm||Min. adjustable height||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Depth gel||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
FP 115||116||+10||300||±0,3 K (150 °C)|| || ||5|| || ||714||636||732||714 x 636 x 732 mm||550||383||550||550 x 383 x 550 mm||55||1400|| ||Mains connection||230 V, 50/60 Hz|| || ||1
Binder
9010-0364
Material test chamber
0
0
1
1
Out of Stock
PART NO.4AJ-6324753
81119||79101||81588||82770||81795||82687||79085||78965||81136||82340||82959||82954||82885||79917||82993||83021||82804||82574||81974||81449||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Max. voltage V||Length arm mm||No. of plates||Writeable||With timer||Max. no. of inserts||Media||Exchange capacity||Ext. width mm||Min. measured value mbar||Ext. height mm||Min. adjustable height||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Depth gel||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
FP 260||259||+10||300||±0,4 K (150 °C)|| || ||8|| || ||810||786||962||810 x 786 x 962 mm||650||512||780||650 x 512 x 780 mm||82||2500|| ||Mains connection||230 V, 50/60 Hz|| || ||1
BINDER
9010-0365
FP260
Material test chamber
0
0
2
1
Out of Stock
PART NO.6-9010-0363
81119||79101||81588||82770||81795||82687||79085||78965||81136||82340||82959||82954||82885||79917||82993||83021||82804||82574||81974||81449||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Max. voltage V||Length arm mm||No. of plates||Writeable||With timer||Max. no. of inserts||Media||Exchange capacity||Ext. width mm||Min. measured value mbar||Ext. height mm||Min. adjustable height||Int. width mm||Deepenings/ chambers Ø mm||Height int. mm||Depth gel||Weight kg||Rated capacity W||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
FP 56||60||+10||300||±0,4 K (150 °C)|| || ||4|| || ||560||596||622||560 x 596 x 622 mm||400||342||440||400 x 342 x 440 mm||41||1200|| ||Mains connection||230 V, 50/60 Hz|| || ||1
Binder
9010-0363
Material test chamber
0
0
0
1
Out of Stock